Go-peds and stuff
LinkExchange Member
Potatoe Guns
A potatoe gun is a device made out of pvc pipe, a grill ignitor, and pipe glue. It shoots potatoes up to 200 yards. It can blow a piece of plywood a inch and a half thick in half from 100 feet. It works off of simple hair spray as a propellant. It is loud as a shotgun and almost as powerful. The plans we supply are easy to follow and the parts you can pick up at your local hardware store. Any average Joe can assemble it in about 10 minutes.
This is what you will need: 4' of sch. 40 ABS 18''of sch. 40 ABS 4'' to 1 1/2'' Bell Reducer 4'' Female adapter 4'' Cleanout Plug BBQ Lighter ABS Glue, Grade Yellow or Black.!!!DO NOT USE PVC GLUE ON ABS!!! Drill with 1/2 Drill bit. Hammer I WILL NOT BE HELD RESPONSIBLE IF YOU BLOW YOUR FACE OFF WITH ONE OF THESE THINGS. SPUD GUNS CAN KILL YOU. THEY ARE NOT TOYS, THEY SHOULD NEVER BE POINTED AT ANYONE FOR ANY REASON. Sorry if this is your picture E-Mail me and I will give you credit. This Is My Picture Example: 1st. Use a sharp hacksaw to gut pipe to size. Make sure pipe is clean, sand contact areas of pipe. 2nd. Glue barrel to reducer. Give it a twist as you put it in place. Then use a hammer to tap it in place. 3rd. Glue Female adapter to the 18''(don't get glue in threads)chamber use hammer to tap in place. 4th. Now glue the reducer to the 18'' chamber. Make sure it is in good use a lot of glue don't get cheap on me. Take a hammer and tap the barrel top to make sure it is in good. 5th. Take a paper-clip cut about 1 cm off, then tape or soder it to the peice of metal on the side of the lighter. Take and bend to were it comes about a 2cm from the top. Press the button and it should spark. 6th. Now take the cleanout plug and use the 1/2 drill bit and drill all hole in the sqaure part of the plug. 7th Now before you put it in take the ABS glue and put on the BBQ Lighter threads. Now stick it in the hole and use the nut to secure it in place let dry for about 2min and take some pliers and give the lighter a tight COUNTER CLOCKWISE turn not the nut. 8th Take a file and round the ends of the barrel so that it cuts the spud to size. take the end cap off now take a stick or a broom stick and shove the spud down the barrel Spray about 8 seconds of choke cleaner or hair spray in the camber. Push the button... BANG whatch the spud fly, and feal the kick! This spud gun has a range of 200 yards!!!!! Using choke cleaner.Cable Descrambler
A cable descrambler descrambles all the cable pay and basic channels such as HBO, CINEMAX, PAY-PER VIEW and so on. The plans we give are free and are the same one those rip off piece of @#$%& sell you. The plans are easy to follow and contain a parts list for Radio Shack on where to get the parts. Once you buy the parts it costs at the most $12 and all you need to assemble it is a screwdriver and a soldering gun. It really works!
Go-peds
At this web page of mine you will find lots of info and other media on go-peds.
Please e-mail any questions to You are the