Front Bracket, Left is the original 1.2lb or 520grams made from 1/16th metal then chromed. Right bracket reproduction 1.9lb or 860grams made from 1/8th stainless steel. |
Rear Bracket left original 1.3lb or 550grams made from 1/16th metal chromed. Rear bracket Right, reproduction 2.4lb or 1kg made from 1/8th stainless steel. |
Re-production has added support brace across the back modified front to accommodate racks without pins. |
Rear bracket also has support brace |
Rear bracket has removable alignment bar for racks without pins. |
Brackets made of 1/8th inch stainless steel. |
Brackets made of 1/8th inch stainless steel. |
Picture shows how modifications to brackets can adapt to racks with or without pins. |
2 strap system using double "D" rings & Velcro! |
Pads on "D" rings to prevent rubbing. |
Straps attach using mounting posts instead of pins. Strap hooks made from 1/4inch stainless steel and are rubber coated. Hooks work best attached in this manner, the panels sit on top of rubber hooks and don't rub on the chrome rack. |
Rear bracket also has support brace |
Under side of straps has thick soft fleece to protect t-top panels. |
Top side of strap has Velcro to secure straps in place. |
Double "D" rings used correctly along with Velcro makes a very secure system. |
*IMPORTANT!!!!!!!!!!* in order to use holders you need at least 8 1/2inch clearance between rack and rear window and 1 1/2inch from front edge or rack and 2 1/4inch from rear of rack (antenna clearance!!!!) |
Factory and Factory Reproductions Are Made To Fit Luggage Racks With Alignment Pins.
Racks Without Pins Can Allow Factory Brackets To Slide Backwards And Allow Strap To Loosen And Fall Off!
My Modified Brackets Do Not Require Alignment Pins. If You Want To Keep Your Pre 1977 Corvette Factory
Original Or Do Not Want To Drill And Install Pins In Your Existing Rack, These Will Fit All 3 Rack Types.
See Modifications Below
These Brackets Will Easily Fit In Rear Storage Compartment And Are Made Of Stainless Steel And Will Not
Rust Or Pit Or Bubble Like Chrome. Light Scratches Can Be Easily Buffed Out.
Two Strap System For Added Security. Fully Fleece Lined To Protect Straps From Rubbing On T-Tops.
Custom Colors Add 10% To Price 2004 model now come with new improvements
Complete set of brackets and straps=$225.00 us. (originals selling for approximately
$300.00 u.s. Feedback would be appriciated from all customers!  View My Guestbook Sign My Guestbook |
