|
|
|
| B16A/B18C/Type R Swap Specifics 1988-1991 Honda Civic/CRX- B16A cable/B16A hydro/B18C, and B18C5. For this swap the following is required: 1. Motor Mount Kit, I can supply this for the same cost as HASport, or whoever you choose to go with. The average cost is $400-$500. 2. Outer CV axles from an 86-93 Integra. The cost on this is $50-$75 from a salvage yard. 3. You will also need to buy the sub harness to add the wires not included on your stock harness cost is $75, unless your vehicle is throttle body injected then the cost is $250. 1992-1995 Honda Civic/ Delsol- B16Acable/ hydro/B18C, and B18C5 1.You will need to buy the sub harness from HASport for $75 to add the six wires your stock harness does not have. 2. If you choose to go with the B16A Cable you'll need to order the hydro to cable clutch converter, and mount kit which I have available for $550. 1996-1999 Civic/ Delsol-B16Acable/ hydro/B18C, and B18C5 1. You will need to buy the sub harness from HASport for $75 to add the six wires your stock harness does not have 2. If you choose to go with the B16A Cable you'll need to order the hydro to cable clutch converter, and mount kit which I have available for $550. 3. It is also necessary to order the OBDI to OBDII Converter from Skunk II for this swap to operate correctly. The cost on this is $250 and is well worth the money. 1990-1993 Acura Integra-B16A cable/B16A hydro/B18C, and B18C5 This is by far the easiest car to perform a hybrid JDM conversion into. 1. Your only mods will be to add the three wires your stock harness does not include. 1994-1995 Acura Integra-B16A cable/B16A hydro/B18C, and B18C5 1.You will also need to add the three wires your stock harness does not include 2. If you choose to go with the B16A Cable you’ll need to order the hydro to cable clutch converter which I have available for $300. 1996-1999 Acura Integra-B16A cable/B16A hydro/B18C, and B18C5 1.You will also need to add the three wires your stock harness does not include 2. If you choose to go with the B16A Cable you’ll need to order the hydro to cable clutch converter which I have available for $300. 3. It is also necessary to order the OBDI to OBDII Converter from Skunk II for this swap to operate correctly. The cost on this is $250 and is well worth the money. |
|
| << BACK | NEXT>> |
| ©2001 JDM Engine Dynamics |
