Team PB Racing

Yamaha Bearings

 

teampbracing@hotmail.com

OD = Out Side Dia
ID = Inside Dia
W = Width

Yamaha GP and SL 292 Clutch Bearing.

This Bearing goes on the inside of the Stock Yamaha 292 Clutch. It's the bearing that the belt rides on while the motor is idleing. Don't let a bad bearing eat up your expensive belts. This one can be hard to find due to it's narrowness.

OD = 52 MM
ID = 28 MM
W= 12 MM

Price is $11.00 Each

 

Yamaha GS 300 and SM 292 Clutch Bearing.

This Bearing goes on the inside of the Stock Yamaha 292 Clutch. It's the bearing that the belt rides on while the motor is idleing. Don't let a bad bearing eat up your expensive belts. GS's and SM's have the Removeable Cluth on a Taper.

OD = 52 MM
ID = 25 MM
W= 15 MM

Price is $7.00 Each

 

Yamaha GS 300 and SM 292 Crank Bearings.

These bearings are for the Crank Shafts of the Smaller 30mm cranks. They are often found in GS 300's and SM 292's with the Taper Cranks. Replace those 30 year old bearings and save your motor from an early death. They will not fit GP's or SL's.

OD = 72 MM
ID = 30 MM
W= 19 MM

Price is $13.00 Each

 

Yamaha GP 292, GP 292F, GP 300 and SL 292 1971-1976 Crank Bearings.

These bearings are for the Crank Shafts of the larger 32mm cranks. They are the most common crank bearings, but the hardest to find. They fit all 292's with the spline cranks. Yamaha sells these for $72.00 each. Our supplier has found them for about half the price. These are not China made bearings, they are good grade Japan made. Replace those 30 year old bearings and save your motor from an early death. At this price you can't afford not to replace them. They will not fit GS's or SM's.

OD = 72 MM
ID = 32 MM
W= 19 MM

Price is $30.00 Each

 

 

Yamaha 1973 SR 292, Thunderjet 295 17mm Wide Crank Bearings.

These bearings are for the Crank Shafts of the larger 32mm cranks. There are Custom 17mm wide bearing for the daul PTO bearings found in the 292R motors. These are VERY hard to find and can not bought from Yamaha. These are not China made bearings, they are NSK bearings made in Japan.

OD = 72 MM
ID = 32 MM
W= 17 MM

Price is (call for qoute) Limited Supply

 

Yamaha Idler wheel bearings.

Replace those stuck idler wheel bearing with new ones. This is also the bearing used on the yamaha boogie wheeled sleds. Sticky bearing can add up to seconds on the track and increase drag. Don't let your buddy pass you on the back strech because your running 30 year old bearings. You will need 12 bearings for a boogie Suspension sled.

OD = 42 MM
ID = 20 MM
W = 12 MM

Price is $3.00 Each
OR
12 for $30.00

 

Yamaha Rear Idler Wheel Bearings

These fit the early Slide Suspension Yamaha Rear Wheels. They fit many sleds, as Yamaha used the same bearing for a long time. So if your not sure you can email us or just measure your old bearings. This is probally the most important bearing in your Suspension. All your track pressure is put on this bearing.

OD = 47 MM
ID = 20 MM
W = 14 MM

Price is $4.50 Each

 

ORDERING

To order bearing email us. Tell us what you need and we will get you a shipping quote. Most of the time it's under 5 bucks to ship in the USA. Sorry at this time we can not offer sales to other countrys. Money orders are welcome, Personal Checks are held for 2 weeks. Thanks