SIIG, INC. E-LAN 200T Card Type Network Interface Card NIC Type Ethernet Maximum Onboard Memory Unidentified Boot ROM Available Network Transfer Rate 10Mbps Topology Star, linear bus Wiring Type RJ-45 Unshielded Twisted Pair AUI transceiver Data Bus 16-bit ISA [Image] CONNECTIONS Function Label Function Label 10 Base-5 AUI connector CN1 10 Base-T UTP CN2 connector USER CONFIGURABLE SETTINGS Function Label Position » AT bus timing J1 Pins 1 & 2 closed Not fully AT bus timing J1 Pins 2 & 3 closed » Remote boot disable SW1/8 Off Remote boot enable SW1/8 On » Factory configured - do not alter JP1 Reserved BIOS ADDRESS SELECTION Address SW1/5 SW1/6 SW1/7 C000h On On On C400h Off On On » C800h On Off On CC00h Off Off On D000h On On Off D400h Off On Off D800h On Off Off DC00h Off Off Off BASE I/O ADDRESS SELECTION Setting SW1/3 SW1/4 » 300h On On 320h Off On 340h On Off 360h Off Off INTERRUPT SELECTION IRQ SW1/1 SW1/2 2 On On » 3 Off On 4 On Off 5 Off Off DIAGNOSTIC LED(S) Note: Functions of LED1, LED2, LED3, LED4 are unidentified.