SIIG, INC.

E-LAN 200

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Available
Network Transfer Rate  Unidentified
Topology               Linear Bus, Star
Wiring Type            AUI transceiver via DB-15 port

                       RG-58A/U 50ohm coaxial
Data Bus               16-bit ISA

[Image]

                                CONNECTIONS

         Function            Label           Function            Label

  AUI transceiver via         CN1       RG-58A/U connector        CN2
  DB-15 port

                        BUS COMPATIBILITY SELECTION

                 Setting                                 JP2

  »        AT BUS Timing compatible               Pins A & B closed

            Not fully AT compatible               Pins B & C closed

                        BASE I/O ADDRESS SELECTION

           Setting                      J1                    J2

  »            300h                   Closed                Closed

               320h                    Open                 Closed

               340h                   Closed                 Open

               360h                    Open                  Open

                            INTERRUPT SELECTION

      IRQ           JP1/A          JP1/B          JP1/C         JP1/D

         2         Closed          Open           Open           Open

  »      3          Open          Closed          Open           Open

         4          Open           Open          Closed          Open

         5          Open           Open           Open          Closed

                           CABLE TYPE SELECTION

         Type            JD/A    JD/B     JD/C    JD/D     JD/E     JD/F

  »   RG-58A/U 50ohm     Pins     Pins    Pins     Pins    Pins    Pins 1
      coaxial            1 & 2   1 & 2    1 & 2   1 & 2    1 & 2    & 2

      AUI transceiver    Pins     Pins    Pins     Pins    Pins    Pins 2
      via DB-15 port     2 & 3   2 & 3    2 & 3   2 & 3    2 & 3    & 3

  Note: Designated pins are closed.

                          BOOT ROM CONFIGURATION

                 Setting                                 J6

  »                Disabled                             Open

                    Enabled                            Closed

                           ROM ADDRESS SELECTION

         Address                J3               J4              J5

            C000h             Closed           Closed          Closed

            C400h              Open            Closed          Closed

  »         C800h             Closed            Open           Closed

            CC00h              Open             Open           Closed

            D000h             Closed           Closed           Open

            D400h              Open            Closed           Open

            D800h             Closed            Open            Open

            DC00h              Open             Open            Open

                         DIAGNOSTIC LED(S)

  Note: Functions of LED1, LED2, LED3, and LED4 are unidentified.