CISCO SYSTEMS, INC. CDDI EISA HP DUAL ATTACHMENT ADAPTER Card Type Network Interface Card NIC Type CDDI Maximum Onboard Memory Unidentified Boot ROM Unidentified Network Transfer Rate 10Mbps Topology Ring Wiring Type Unshielded twisted pair Data Bus 32-bit EISA [Image] CONNECTIONS Function Label Function Label UTP via RJ-45 CN1 2-pin mini DIN CN3 connector (Port B) connector (Bypass Switch) UTP via RJ-45 CN2 connector (Port A) DIAGNOSTIC LED(S) LED Color Status Condition LED1 Unidentified On Internal diagnostics tests passed (Port B) LED1 Unidentified Off Internal diagnostics tests failed (Port B) LED3 Unidentified On Internal diagnostics tests passed (Port A) LED3 Unidentified Off Internal diagnostics tests failed (Port A) DIAGNOSTIC LED(S) CONTINUED LED2 LED4 Condition Off Off Ring is not operational Off Green Station is in wrap B. Ring is an operational SAS. Ring A is not a connected DAS. Off Orange Ring is not operational. Station connected to Port B attempting to connect, but has failed. Green Off Station is in wrap A. Ring B not connected. Green Green Station is in thru mode. Ring is operational. Green Orange Station is in wrap A. Station connected to Port B is attempting to connect, but has failed. Orange Off Ring is not operational. Station connected to Port A is attempting to connect, but has failed. Orange Green Station is in wrap B. Station connected to Port A is attempting to connect, but has failed. (Normal if station is dual homed.) Orange Orange Ring is not operational. Stations connected to Port A and Port B are attempting to connect, but have failed.