SIIG, INC.

E-LAN 300

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory 16KB
Boot ROM               Available
Network Transfer Rate  10Mbps
Topology               Linear Bus, Star
Wiring Type            Unshielded twisted pair

                       AUI transceiver via DB-15 port

                       RG-58A/U 50ohm coaxial
Data Bus               16-bit ISA

[Image]

                                CONNECTIONS

         Function            Label           Function            Label

  RJ-45 connector             CN1       RG-58A/U connector        CN3

  AUI transceiver via         CN2
  DB-15 port

                           ROM ADDRESS SELECTION

         Address              JP1/B            JP1/C            JP1/D

            C000h              Open             Open            Open

            C400h              Open             Open           Closed

  »         C800h              Open            Closed           Open

            CC00h              Open            Closed          Closed

            D000h             Closed            Open            Open

            D400h             Closed            Open           Closed

            D800h             Closed           Closed           Open

            DC00h             Closed           Closed          Closed

                        BASE I/O ADDRESS SELECTION

             Setting                     JP1/E                JP1/F

  »              300h                     Open                Open

                 320h                     Open               Closed

                 340h                    Closed               Open

                 360h                    Closed              Closed

                           CABLE TYPE SELECTION

    Setting         JP2/A         JP2/B          JP2/C          JP2/D

  BNC enabled     Pins 3 & 4    Pins 3 & 4     Pins 3 & 4     Pins 3 & 4
                   closed         closed         closed         closed

  AUI enabled     Pins 2 & 3    Pins 2 & 3     Pins 2 & 3     Pins 2 & 3
                   closed         closed         closed         closed

  RJ-45           Pins 1 & 2    Pins 1 & 2     Pins 1 & 2     Pins 1 & 2
  enabled          closed         closed         closed         closed

                       CABLE TYPE SELECTION (CONT.)

    Setting         JP2/E         JP2/F          JP2/G          JP2/H

  BNC enabled     Pins 3 & 4    Pins 3 & 4     Pins 3 & 4     Pins 3 & 4
                   closed         closed         closed         closed

  AUI enabled     Pins 2 & 3    Pins 2 & 3     Pins 2 & 3     Pins 2 & 3
                   closed         closed         closed         closed

  RJ-45           Pins 1 & 2    Pins 1 & 2     Pins 1 & 2     Pins 1 & 2
  enabled          closed         closed         closed         closed

                          BOOT ROM CONFIGURATION

                 Setting                               JP1/A

  »               Disabled                             Open

                   Enabled                            Closed

                        AT BUS COMPATIBILITY SELECT

                 Setting                                JP3

  »   System compatible w/IBM PC/AT bus          Pins 1 & 2 closed

      System not compatible w/IBM PC/AT          Pins 2 & 3 closed
      bus

                             DIAGNOSTIC LED(S)

    LED         Color         Status                 Condition

   LED1      Unidentified       On               UTP link is good

   LED1      Unidentified       Off             UTP link is broken