DIAMOND FLOWER, INC.

NET-760ECT

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory 16KB
Boot ROM               Available
Network Transfer Rate  10Mbps
Topology               Linear Bus, Star
Wiring Type            Unshielded twisted pair

                       AUI transceiver via DB-15 port

                       RG-58A/U 50ohm coaxial
Data Bus               16-bit ISA

[Image]

                                CONNECTIONS

         Function            Label           Function            Label

  RJ-45 connector             CN1       RG-58A/U connector        CN3

  AUI transceiver via         CN2
  DB-15 port

                          SOFTWARE/JUMPER SELECT

           Setting                 JP2            JP3            JP4

  »   Card is software             Open          Open          Closed
      configurable

      Card is jumper              Closed        Closed          Open
      configurable

  Note: If card is set to "software configurable", jumper cab on IRQ
  block should be removed.

                           INTERRUPT SELECTION (JP6)

   IRQ      A        B        C        D        E        F        G        H

      2   Closed    Open     Open     Open    Open     Open     Open     Open

  »   3    Open    Closed    Open     Open    Open     Open     Open     Open

      4    Open     Open    Closed    Open    Open     Open     Open     Open

      5    Open     Open     Open    Closed   Open     Open     Open     Open

      10   Open     Open     Open     Open    Closed   Open     Open     Open

      11   Open     Open     Open     Open    Open     Closed   Open     Open

      12   Open     Open     Open     Open    Open     Open     Closed   Open

      15   Open     Open     Open     Open    Open     Open     Open     Closed

                           ROM ADDRESS SELECTION

        Address             J1           J2           J3           J4

  »       Disabled         Open         Open         Open         N/A

           C0000H          Open         Open        Closed        Open

           C4000H          Open         Open        Closed       Closed

           C8000H          Open        Closed        Open         Open

           CC000H          Open        Closed        Open        Closed

           D0000H          Open        Closed       Closed        Open

           D4000H          Open        Closed       Closed       Closed

           D8000H         Closed        Open         Open         Open

           DC000H         Closed        Open         Open        Closed

                        BASE I/O ADDRESS SELECTION

        Setting                J5               J6               J7

            240h              Open            Closed            Open

            280h              Open            Closed           Closed

            2C0h             Closed            Open             Open

            320h             Closed            Open            Closed

  »         330h              Open             Open             Open

            340h             Closed           Closed            Open

            360h             Closed           Closed           Closed

                     AT BUS COMPATIBILITY SELECT (JP1)

          Setting                  A              B               C

  »     System compatible         Open          Closed         Closed
         w/IBM PC/AT bus

            System not           Closed         Closed          Open
         compatible w/IBM
            PC/AT bus

                           CABLE TYPE SELECTION

                  Type                                  JP5

  »   BNC/RJ-45 (auto select) enabled                   Open

      AUI enabled                                      Closed

                          DIAGNOSTIC LED(S)

  LED     Color    Status                  Condition

  LED1    Green      On                 UTP link is good

  LED1    Green      Off               UTP link is broken