EFA CORPORATION

PNP 120

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Available
Network Transfer Rate  10Mbps (20Mbps full duplex)
Topology               Star, linear bus
Wiring Type            RJ-45 Unshielded twisted pair

                       RG-58A/U 50ohm coaxial
Data Bus               16-bit ISA

[Image]

                           CONNECTIONS

       Function          Label          Function         Label

  RJ-45 connector         CN1     AUI connector           CN3

  RG-58 A/U connector     CN2

  Note: An adapter is needed to use the AUI connector

                        USER CONFIGURABLE SETTINGS

                  Function                     Label         Position

  Plug & Play enabled                          JP1/A          Closed

  Plug & Play disabled                         JP1/A           Open

  Jumperless mode enabled                      JP1/B          Closed

  Jumperless mode disabled                     JP1/B           Open

  Jumper mode enabled                          JP1/C          Closed

  Jumper mode disabled                         JP1/C           Open

  Note: When using software to configure the adapter, JP1/A & JP1/B may
  be left open. However, JP1/C must be closed to configure the jumper
  settings. Jumper settings override software settings

                        BOOT ROM ADDRESS SELECTION

   Address      Size       JP2/A     JP2/B     JP2/C     JP2/D     JP2/E

    C000h       16KB      Closed     Open      Open      Open      Open

    C400h       16KB      Closed     Open      Open      Open     Closed

    C800h       16KB      Closed     Open      Open     Closed     Open

    CC00h       16KB      Closed     Open      Open     Closed    Closed

    D000h       16KB      Closed     Open     Closed     Open      Open

    D400h       16KB      Closed     Open     Closed     Open     Closed

    D800h       16KB      Closed     Open     Closed    Closed     Open

    DC00h       16KB      Closed     Open     Closed    Closed    Closed

    C000h       32KB       Open     Closed     Open      Open      Open

    C800h       32KB       Open     Closed     Open      Open     Closed

    D000h       32KB       Open     Closed     Open     Closed     Open

    D800h       32KB       Open     Closed     Open     Closed    Closed

    C000h       64KB       Open     Closed    Closed     Open      Open

    D000h       64KB       Open     Closed    Closed     Open     Closed

  Disabled     Disabled    Open      Open       N/A       N/A       N/A

              BASE I/O ADDRESS SELECTION

  Setting    JP2/F      JP2/G      JP2/H      JP2/I

   300h       Open       Open      Open       Open

   320h       Open       Open      Open      Closed

   340h       Open       Open     Closed      Open

   360h       Open       Open     Closed     Closed

   380h      Closed      Open      Open       Open

   3A0h      Closed      Open      Open      Closed

   3C0h      Closed      Open     Closed      Open

   3E0h      Closed      Open     Closed     Closed

   200h       Open      Closed     Open       Open

   220h       Open      Closed     Open      Closed

   240h       Open      Closed    Closed      Open

   260h       Open      Closed    Closed     Closed

   280h      Closed     Closed     Open       Open

   2A0h      Closed     Closed     Open      Closed

   2C0h      Closed     Closed    Closed      Open

   2E0h      Closed     Closed    Closed     Closed

           INTERRUPT SELECTION

    IRQ      JP3/A     JP3/B     JP3/C

  IR/FONT    Open       Open      Open

   IRQ3      Open       Open     Closed

   IRQ4      Open      Closed     Open

   IRQ5      Open      Closed    Closed

   IRQ10    Closed      Open      Open

   IRQ11    Closed      Open     Closed

   IRQ12    Closed     Closed     Open

   IRQ15    Closed     Closed    Closed

                              DIAGNOSTIC LED

  Label        Color         Status                 Condition

   LED      Unidentified       On         UTP link is good (10 BASE 2)

   LED      Unidentified      Off        UTP link is broken (10 BASE 2)

   LED      Unidentified    Blinking    Network is receiving/transmitting
                                                data (10 BASE T)