ANCOR COMMUNICATIONS, INC.

FCS 266 EISA

NIC Type               Fiber Channel
Processor              Intel i960
Processor Speed        33MHz
Chipset                Ancor Communications VHSCI 3
Maximum Onboard Memory 1.5MB SRAM/128KB Flash ROM
Network Transfer Rate  265.6125Mbps
Data Bus               EISA
Topology               Star/Peer-Peer
Wire Type              Fiber optic cable
Boot ROM               Not available

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Transmit fiber optic SC     CN1      Receive fiber optic SC       CN2
  connector                            connector

                            SRAM CONFIGURATION

  The first 512KB of SRAM, used for processor memory, is located on the
  board. Its exact location is unidentified. The SRAM SIMM, used as a
  data buffer, may be 256KB or 1MB. The type and configuration of this
  SIMM is also unidentified.

                             DIAGNOSTIC LED(S)

    LED          Color           Status                Condition

    LED1      Unidentified      Blinking           Normal operation

    LED1      Unidentified      1 blinks      EPROM failed checksum test

    LED1      Unidentified      2 blinks        Processor memory failed
                                                       self-test

    LED1      Unidentified      3 blinks          Buffer memory failed
                                                       self-test

    LED1      Unidentified      4 blinks         FPGA failed self-test

    LED1      Unidentified      5 blinks       Flash ROM failed checksum
                                                         test

    LED1      Unidentified      6 blinks          Flash ROM ID failed
                                                       self-test

    LED1      Unidentified      7 blinks       OLC loopback test failed

    LED1      Unidentified      8 blinks        Chipset register failed
                                                       self-test

    LED1      Unidentified      9 blinks        Timer failed self-test

    LED1      Unidentified         Off         Power is off or processor
                                                  is not functioning

    LED2      Unidentified         On          Card is transmitting data

    LED2      Unidentified         Off          Card is not transmitting
                                                         data

    LED3      Unidentified         On           Card is receiving data

    LED3      Unidentified         Off        Card is not receiving data