EDIMAX COMPUTER CORPORATION

2000RA 2-IN-1

NIC Type               Ethernet
Network Transfer Rate  10Mbps
Data Bus               16-bit ISA
Topology               Linear Bus, Star
Wiring Type            Unshielded twisted pair (location unidentified)

                       RG-58A/U 50ohm coaxial (location unidentified)
Boot ROM               Available (location unidentified)

[Image]

                        USER CONFIGURABLE SETTINGS

                   Function                       Label       Position

  »   Boot ROM Disabled                           JP1/A         Open

      Boot ROM Enabled                            JP1/A        Closed

  »   Software configuration - Jumperless         JP2/A        Closed
      mode

      Hardware configuration - Jumpered mode      JP2/A         Open

         BASE I/O ADDRESS SELECTION

  Address    JP1/E      JP1/F       JP1/G

   200h      Closed      Open       Open

   220h      Closed      Open      Closed

   240h      Closed     Closed      Open

   260h      Closed     Closed     Closed

   300h       Open       Open       Open

   320h       Open       Open      Closed

   340h       Open      Closed      Open

   360h       Open      Closed     Closed

                              INTERRUPT SELECTION

   IRQ    JP2/B    JP2/C    JP2/D    JP2/E    JP2/F    JP2/G    JP2/H    JP2/I

      2   Closed    Open     Open     Open    Open     Open     Open     Open

  »   3    Open    Closed    Open     Open    Open     Open     Open     Open

      4    Open     Open    Closed    Open    Open     Open     Open     Open

      5    Open     Open     Open    Closed   Open     Open     Open     Open

      10   Open     Open     Open     Open    Closed   Open     Open     Open

      11   Open     Open     Open     Open    Open     Closed   Open     Open

      12   Open     Open     Open     Open    Open     Open     Closed   Open

      15   Open     Open     Open     Open    Open     Open     Open     Closed

  Note: When setting IRQ leave JP2/A open.

                          BOOT ROM SIZE SELECTION

         Size               JP1/B             JP1/C            JP1/D

          C0000h             Open              Open             Open

          C4000h             Open              Open            Closed

  »       C8000h             Open             Closed            Open

          CC000h             Open             Closed           Closed

          D0000h            Closed             Open             Open

          D4000h            Closed             Open            Closed

          D8000h            Closed            Closed            Open

          DC000h            Closed            Closed           Closed

  Note: When setting Boot ROM Address make sure jumper JP1/A is closed.

                              TECHNICAL NOTE

  Note: The location of the 2 LEDs for network activity is unidentified.