INVISIBLE SOFTWARE, INC.

2000C/FD

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear Bus
Wiring Type   RG-58A/U 50ohm coaxial
Boot ROM      Available

[Image]

                        BASE I/O ADDRESS SELECTION

          Address                   JP1/A                   JP1/B

  »           300h                   Open                    Open

              320h                  Closed                   Open

              340h                   Open                   Closed

              360h                  Closed                  Closed

                            INTERRUPT SELECTION

   IRQ     JP2/A     JP2/B    JP2/C    JP2/D    JP2/E     JP2/F    JP2/G

  »   3     Open     Closed   Open      Open     Open     Open     Open

      2    Closed    Open     Open      Open     Open     Open     Open

      4     Open     Open     Closed    Open     Open     Open     Open

      5     Open     Open     Open     Closed    Open     Open     Open

      10    Open     Open     Open      Open    Closed    Open     Open

      11    Open     Open     Open      Open     Open     Closed   Open

      12    Open     Open     Open      Open     Open     Open     Closed

                          BOOT ROM CONFIGURATION

                 Setting                               JP1/E

  »                Disabled                             Open

                   Enabled                             Closed

                                ROM ADDRESS

          Address                    JP1/C                  JP1/D

  »          C800h                  Closed                   Open

             C000h                   Open                    Open

             D000h                   Open                   Closed

             D800h                  Closed                  Closed

                             BUS COMPATABILITY

                  Setting                                JP3

  »           Normal AT bus timing                      Open

             Alternative bus timing                    Closed

                             DIAGNOSTIC LED(S)

   LED        Color        Status                  Condition

   LED        Green       Blinking     Data is being transmitted/received

   LED        Green         Off                 Data is notbbeing
                                              transmitted/received