COMPU-SHACK PRODUCTION, GMBH

CS-ETHERNET-KARTE COMBO PREMIUM

NIC Type:      Ethernet
Transfer Rate: 10Mbps
Data Bus:      16-bit ISA
Topology:      Linear Bus

               Star
Wiring Type    RG58A/U 50ohm coaxial

               Shielded/unshielded twisted pair
Boot ROM       Available

[Image]

                   HARDWARE/SOFTWARE CONFIGURABLE SELECT

                    Setting                                J1

  »         Card is software-configured                   Open

       Card is hardware (jumper) configured              Closed

                           BOOT ROM ADDRESS - J2

     Address        Jumper A   Jumper B   Jumper C    Jumper D   Jumper F

  »    Disabled      Open       Open        Open       Open       Closed

        C0000h       Open      Closed       Open       Open        Open

        C4000h      Closed     Closed       Open       Open        Open

        C8000h       Open       Open       Closed      Open        Open

        CC000h      Closed      Open       Closed      Open        Open

        D0000h       Open      Closed      Closed      Open        Open

        D4000h      Closed     Closed      Closed      Open        Open

        D8000h       Open       Open        Open      Closed       Open

        DC000h      Closed      Open        Open      Closed       Open

                             I/O ADDRESS - J3

       Address           Jumper A          Jumper B          Jumper C

  »       300h             Open              Open              Open

          240h             Open             Closed             Open

          280h            Closed            Closed             Open

          2C0h             Open              Open             Closed

          320h            Closed             Open             Closed

          340h             Open             Closed            Closed

          360h            Closed            Closed            Closed

                           INTERRUPT SELECT - J3

         IRQ              Jumper D          Jumper E         Jumper F

  »        IRQ3             Open              Open             Open

           IRQ4            Closed             Open             Open

           IRQ5             Open             Closed            Open

           IRQ7            Closed            Closed            Open

           IRQ9             Open              Open            Closed

          IRQ11             Open             Closed           Closed

          IRQ12            Closed            Closed           Closed

                              FAST-READ MODE

                Setting                            J3/jumper G

  »               Disabled                             Open

                  Enabled                             Closed

                           NE2000/WD MODE SELECT

               Setting                             J3/jumper H

  »             NE2000 mode                           Open

                  WD mode                            Closed

                            WIRING TYPE SELECT

                   Setting                            J4/jumper A

  »               BNC (coaxial)                         Closed

        Shielded/unshielded twisted-pair                 Open

                       TWISTED PAIR STATUS LED (D4)

                Setting                            J4/jumper C

  »               Disabled                             Open

                  Enabled                             Closed

                               IOCS16 SIGNAL

                Setting                            J4/jumper D

  »               Disabled                             Open

                  Enabled                             Closed

                              IOCHRDY SIGNAL

                Setting                            J4/jumper E

  »               Disabled                             Open

                  Enabled                             Closed

                               BNC-TYPE - J8

         Setting             Jumper A        Jumper B         Jumper C

  »      RG58A/U 50ohm       All pins       Pins 2 & 3       Pins 2 & 3
           coaxial             open           closed           closed

         RG62A/U 93ohm       All pins       Pins 1 & 2       Pins 1 & 2
           coaxial             open           closed           closed

                               BOOT ROM TYPE

                Setting                                J10

  »              2764 chip                      Pins 2 & 3 closed

                27256 chip                      Pins 1 & 2 closed

           16/64KB RAM VERSION

       Setting               J11

        16KB          Pins 1 & 2 closed

        64KB          Pins 2 & 3 closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

  J2/jumper E         Open

  J2/jumper G         Open

  J2/jumper H         Open

  J4/jumper B         Open

  J4/jumper F         Open

  J4/jumper G         Open

  J4/jumper H         Open

[Image]

                              DIAGNOSTIC LEDS

   LED      Color     Status                    Condition

    D1       Red        On              Data is being transmitted

    D2      Green       On               Data is being received

    D3       Red        On            Collision detected on network

    D4      Green       On       Twisted pair network connection is good

    D5       Red        On      Twisted pair network connection is broken