DANPEX CORPORATION

EN-2000PB/EN-2000PT/EN-2000P3

NIC Type:               Ethernet
Transfer Rate:          10Mbps
Data Bus:               16-bit ISA
Topology:               Linear bus

                        Star
Wiring Type             AUI transceiver via DB-15 port (EN-2000P3,
                        EN-2000P)

                        RG-58A/U 50ohm coaxial (EN-2000P3, EN-2000P)

                        Shielded/Unshielded twisted pair (EN-2000P3,
                        EN2000PT)
Boot ROM                Available

[Image]

                    CONNECTIONS

         Purpose                  Location

  External LED connector             SW2

[Image]

                              DIAGNOSTIC LEDS

    LED      Status                        Condition

   LED1       On       Network connection is good (UTP connection only)

   LED1       Off                Network connection is broken

   LED2       On             Data is being received or transmitted

   LED2       Off          Data is not being received or transmitted

  LED1 exists on models EN-2000PT and EN-2000P3 only.