D-LINK

DE-220PCAT

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear Bus/Star
Wiring Type   Unshielded twisted pair

              AUI Transceiver via DB-15 port

              RG-58A/U 50ohm coaxial
Boot ROM      Available

[Image]

                             DIAGNOSTIC LED(S)

      LED            Status                      Condition

     LED1              On                         Power on

     LED1           Blinking         Data is being transmitted/received
                                                 (UTP only)

     LED1              Off                       Power off

     LED2              On                Network connection is good

     LED2           Blinking         Data is being transmitted/received
                                                 (UTP only)

     LED2              Off              Network connection is broken

     LED3              On              Collision detected on network

     LED3              Off            No collision detected on network

     LED4              On             Network connection is broken (BNC
                                                   only)

     LED4           Blinking        Card is transmitting for an extended
                                               time (jabber)

     LED4              Off                    Normal operation