ADDTRON TECHNOLOGY COMPANY, LTD.

AE-200STA

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear bus
Wiring Type   Unshielded twisted pair

              AUI transceiver via DB-15
Boot ROM      Available

[Image]

                                CABLE TYPE

             Type                  JP1A          JP1B            JP1C

        Unshielded twisted        Closed         Open            Open
               pair

  »   RG58A/U 50ohm coaxial        Open          Open           Closed

        AUI transceiver via        Open         Closed           Open
            DB-15 port

                              LINK INTEGRITY

                Function                                JP2

  »         Link integrity enabled               Pins 1 & 2 closed

           Link integrity disabled               Pins 2 & 3 closed

  Note: If card is used in a pre-10BaseT cabling network, disable the
  link integrity function.

                 ROM SIZE

        Size                 JP3

        32KB          Pins 1 & 2 closed

        16KB          Pins 2 & 3 closed

       SEGMENT LENGTH

    Length         JP4

  185 meters      Open

  300 meters     Closed

                                TERMINATOR

                  Setting                                JP5

  »              Unterminated                           Open

        Coaxial linear-bus terminated by               Closed
                     card

                            INTERRUPT SETTINGS

  IRQ     JP6A     JP6B      JP6C      JP6D     JP6E      JP6F     JP6G

  2/9    Closed    Open      Open      Open     Open      Open     Open

   3      Open     Closed    Open      Open     Open      Open     Open

   4      Open     Open     Closed     Open     Open      Open     Open

   5      Open     Open      Open     Closed    Open      Open     Open

  10      Open     Open      Open      Open     Closed    Open     Open

  11      Open     Open      Open      Open     Open     Closed    Open

  12      Open     Open      Open      Open     Open      Open     Closed

                             BASE I/O ADDRESS

     Address          JP6H          JP6I          JP6J           JP6K

  »      300h         Open          Open          Open          Closed

         320h         Open          Open         Closed          Open

         340h         Open         Closed         Open           Open

         360h        Closed         Open          Open           Open

                             BOOT ROM ADDRESS

    Address        JP6L        JP6M        JP6N       JP6O        JP6P

       C0000h     Closed      Closed      Closed     Closed      Closed

       C4000h     Closed      Closed      Closed     Closed       Open

  »    C8000h     Closed      Closed      Closed      Open       Closed

       CC000h     Closed      Closed      Closed      Open        Open

       D0000h     Closed      Closed       Open      Closed      Closed

       D4000h     Closed      Closed       Open      Closed       Open

       D8000h     Closed      Closed       Open       Open       Closed

       DC000h     Closed      Closed       Open       Open        Open

       E0000h     Closed       Open       Closed     Closed      Closed

                         WAIT STATE CONFIGURATION

               Bus Speed                               JP7

                6MHz - 8MHz                            Open

  »                > 8MHz                             Closed

[Image]

                             DIAGNOSTIC LED(S)

    LED        Color       Status                  Condition

   LED1         Red          Off                data is not being
                                              transmitted/received

   LED1         Red          On        data is being transmitted/received

   LED2        Green         On          10BaseT link integrity exists

   LED2        Green         Off         10BaseT link integrity broken

  Note:LED2 is only functional when link integrity is enabled, and when
  installed on a 10BaseT network.