PURE DATA, LTD.

PDI7023-16T

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Star
Wiring Type   Unshielded twisted pair
Boot ROM      Not available

[Image]

                                         INTERRUPT REQUEST

   IRQ      E2A      E2B      E2C      E2D      E2E      E2F      E2G      E2H     E2I      E2J

      2/9   Open     Open     Open     Open    Closed   Open     Open     Open     Open     Open

      3     Open     Open     Open     Open    Open     Open     Open     Open     Open    Closed

  »   4     Open     Open     Open     Open    Open     Open     Open     Open    Closed    Open

      5     Open     Open     Open     Open    Open     Open     Open     Closed   Open     Open

      6     Open     Open     Open     Open    Open     Open     Closed   Open     Open     Open

      7     Open     Open     Open     Open    Open     Closed   Open     Open     Open     Open

      10    Open     Open     Open    Closed   Open     Open     Open     Open     Open     Open

      11    Open     Open    Closed    Open    Open     Open     Open     Open     Open     Open

      12    Open    Closed    Open     Open    Open     Open     Open     Open     Open     Open

      15   Closed    Open     Open     Open    Open     Open     Open     Open     Open     Open

                             I/O BASE ADDRESS

       Address             SW1/1             SW1/2             SW1/3

           260h              On                On               On

           290h             Off                On               On

           2E0h              On               Off               On

           2F0h             Off               Off               On

  »        300h              On                On               Off

           350h             Off                On               Off

           380h              On               Off               Off

           3E0h             Off               Off               Off

                         EXTENDED TRANSMIT TIMEOUT

                 Setting                               SW1/5

  »                Enabled                               On

                   Disabled                             Off

  Note:With this option enabled, if the card is transmitting for an
  extented amount of time the transmission will be interrupted and
  continued after a preset time. This keeps the card from dominating the
  network.

                            LINK INTEGRITY TEST

                 Setting                               SW1/7

  »                Enabled                               On

                   Disabled                             Off

  FACTORY CONFIGURED SETTINGS

     Switch         Setting

     SW1/4            Off

     SW1/6             On

     SW1/8            Off

                             DIAGNOSTIC LED(S)

     LED         Color         Status                Condition

    LED1          Red            On        Card is being accessed by host
                                                      computer

    LED1          Red           Off         Card is not being accessed by
                                                   host computer

    LED2         Green           On         Data is being transmitted or
                                                      received

    LED2         Green          Off         Data is not being transmitted
                                                    or received

    LED3          Red            On        Receive wires are reversed and
                                                   corrected for

    LED3          Red           Off               Normal operation

    LED4         Green           On          Network connection is good

    LED4         Green          Off         Network connection is broken

  Note:If LED3 is lit the receive wires are reversed. The card will
  automatically correct for this but the wires should be repaired as soon
  as possible.