DANPEX CORPORATION

Aquila AQ-2000TP

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Star
Wiring Type   Unshielded twisted pair

              AUI Transceiver via DB-15 port
Boot ROM      Available

[Image]

                            LINK INTEGRITY TEST

                Setting                                 JP1

  »                Enabled                       Pins 2 & 3 Closed

                  Disabled                       Pins 1 & 2 Closed

  Note:The link integrity test is only valid when the cable type is
  unshielded twisted pair.

                                CABLE TYPE

              Type                   JP2A - JP2F              JP3

  »    RG-58A/U 50ohm coaxial     Pins 2 & 3 Closed           Open

         AUI transceiver via      Pins 1 & 2 Closed          Closed
             DB-15 port

                                 BOOT ROM

                 Setting                               JP4A

  »               Disabled                             Open

                   Enabled                            Closed

                             BOOT ROM ADDRESS

          Address                    JP4C                    JP4D

  »          C8000h                  Open                    Open

             CC000h                 Closed                   Open

             D0000h                  Open                   Closed

             D4000h                 Closed                  Closed

                             I/O BASE ADDRESS

          Address                   JP4E                    JP4F

  »          300h                   Open                    Open

             320h                  Closed                   Open

             340h                   Open                   Closed

             360h                  Closed                  Closed

                             INTERRUPT REQUEST

      IRQ            JP5A          JP5B           JP5C           JP5D

         2/9        Closed         Open           Open           Open

  »       3          Open         Closed          Open           Open

          4          Open          Open          Closed          Open

          5          Open          Open           Open          Closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

      JP4B            Open

                         DIAGNOSTIC LED(S)

    LED        Color      Status               Condition

    LED1        Red         On       Collision detected on network

    LED1        Red        Off             Normal operation