DANPEX CORPORATION (ADI SYSTEMS, INC.)

Aquila AQ-E16-CX/TP

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Star

              Linear Bus
Wiring Type   Unshielded twisted pair (AQ-E16-TP)

              AUI Transceiver via DB-15 port

              RG-58 A/U 50ohm coaxial (AQ-E16-CX)
Boot ROM      Available

[Image]

                            LINK INTEGRITY TEST

               Setting                                JP31

               Enabled                         Pins 1 & 2 Closed

               Disabled                        Pins 2 & 3 Closed

       Note:Link Integrity is only used with 10Base-T wiring. When using
       other than 10BaseT, the test should be disabled.

                                CABLE TYPE

            Type                  JP2A - JP2F                JP3

   RG-58A/U 50ohm coaxial      Pins 2 & 3 closed             Open

  Unshielded twisted pair      Pins 2 & 3 closed            Closed

  AUI transceiver via DB-15    Pins 1 & 2 closed             N/A
            port

                                 BOOT ROM

                 Setting                               JP4A

  »                Enabled                            Closed

                  Disabled                             Open

                             BOOT ROM ADDRESS

          Address                    JP4C                    JP4D

  »          C8000h                  Open                    Open

             CC000h                 Closed                   Open

             D0000h                  Open                   Closed

             D4000h                 Closed                  Closed

                             I/O BASE ADDRESS

          Address                   JP4E                    JP4F

  »          300h                   Open                    Open

             320h                  Closed                   Open

             340h                   Open                   Closed

             360h                  Closed                  Closed

                             INTERRUPT REQUEST

      IRQ            JP5A          JP5B           JP5C           JP5D

         2/9        Closed         Open           Open           Open

  »       3          Open         Closed          Open           Open

          4          Open          Open          Closed          Open

          5          Open          Open           Open          Closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

      JP4B            Open

                             DIAGNOSTIC LED(S)

       Color              Status                    Condition

       Green                On            Twisted pair network connection
                                                     is good

       Green               Off            Twisted pair network connection
                                                    is broken

        Red                 On            Collision detected on network

        Red                Off                   Normal operation