DANPEX CORPORATION (ADI SYSTEMS, INC.)

Aquila AQ-2000CX

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear Bus
Wiring Type   RG-58 A/U 50ohm coaxial

              AUI Transceiver via DB-15 port
Boot ROM      Available

[Image]

                                CABLE TYPE

              Type                   JP2A - JP2F              JP3

  »    RG-58A/U 50ohm coaxial     Pins 2 & 3 Closed           Open

         AUI transceiver via      Pins 1 & 2 Closed          Closed
             DB-15 port

                                 BOOT ROM

                 Setting                               JP4A

  »               Disabled                             Open

                   Enabled                            Closed

                             BOOT ROM ADDRESS

          Address                    JP4C                    JP4D

  »          C8000h                  Open                    Open

             CC000h                 Closed                   Open

             D0000h                  Open                   Closed

             D4000h                 Closed                  Closed

                             I/O BASE ADDRESS

          Address                   JP4E                    JP4F

  »          300h                   Open                    Open

             320h                  Closed                   Open

             340h                   Open                   Closed

             360h                  Closed                  Closed

                             INTERRUPT REQUEST

      IRQ            JP5A          JP5B           JP5C           JP5D

         2/9        Closed         Open           Open           Open

  »       3          Open         Closed          Open           Open

          4          Open          Open          Closed          Open

          5          Open          Open           Open          Closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

      JP1             Open

      JP4B            Open

                         DIAGNOSTIC LED(S)

    LED        Color      Status               Condition

    LED1        Red         On       Collision detected on network

    LED1        Red        Off             Normal operation