33.6 Internal Modem fax/data
Sierra Chip Set $39.50 Part#
MOD 336IBM 1.4 lbs
K56 /V.90 Internal Voice Modem,
HSP (Requires Pent and Win95) $89.00
Part# MOD 56F Pctel
.6 Lbs.
Technical Specification CommWave 56K HSP Plug and Play Modem
Designed for Pentium Machines 100 mhz or faster, running Win95
Main Features :
Full Plug-n-Play and Windows 95 Ready for
Quick and Easy Installation.
Single-Chip Host Signal Processing (HSP) ASIC
for High Speed Data/Fax/Voice.
56Kbps ready for Internet Connection via software
upgrade Data Speed to 33.6Kbps and Fax Speed up to 14.4Kbps.
Automatic Increased Performance When Used
With Higher Speed CPU.
Support Intel® MMX Technology with 25%
CPU Performance Enhancements.
V.80 - VideoPhone Ready. Software Upgradable
to Other Communication Standards When Standardized.
Green Power Management (Low Power Consumption).
More Reliable Than Other DSP Modems.
Microsoft PC 97 and APM 1.2 Complaint
Technical Details:
Full Plug-n-Play and Windows 95 Ready
Supports Intel's Plug-n-Play specifications
and Windows 95 for quick and easy installation.
Full Support For Intel's MMX Technology
With Intel's MMX technology, the performance
of the CommWave modem will be improved tremendously.
56Kbps Ready for Internet Connection
:
High performance DAA circuit, latest
HSP modem chip and one step software upgrade to ensure that your
modem is 56Kbps
Single-Chip
Integrated ASIC to Support High Speed Data, Fax and Voice
Applying state-of-the-art Host Signal
Processing on a powerful Pentium CPU to support data, fax, voice modem
functions on one chip,
enabling the lowest cost, highest
reliability, greatest performance and easiest upgrading demands
of any MPC.
Data Speed Up to 56Kbps and Fax Speed
Up to 14.4Kbps
Data Modem : Asymmetric 56K downstream
and 33.6 upstream (V.Fast-Track when standardized), Dual Stream
33.6 Kbps
(V.34bis) , downward compatible with
slower speed modems.
Fax Modem : Send and receive speeds
up to 14.4Kbps, Class 1, Group 3 Fax. Data Compression :
V.j42bis, MNP Class 5.
Error Correction : V.42 LAPM and MNP
2-4. Support standard AT commands. Enhanced Virtual
UART to overcome throughput limitation of a standard UART (with limited
FIFO) used by a standard modem board. Sustainable DTE rate at
115,200 bps. Auto detection and answering of incoming Data,
Fax or Voice calls. Support both tone and pulse dialing.
Software Upgradable for New Communication
Standards and Higher Performance CPU
Software upgradable to cater for newer
communication standards such as V.80 etc. With higher performance
CPU becoming more readily available, higher throughput and new Host
Signal Processing functions can be upgraded by software releases.
True software upgrade with no performance limitation
of on board hardware (as compared to other software programmable DSP
Modem chipsets which have limited processing
power for future software upgrade).
Feature-rich Telephone Answering Device,
Speakerphone, and TAPI
Feature-rich telephone answering device and
DTMF detection. VoiceMail sending, receiving, broadcasting and forwarding.
SpeakerPhone with noise cancellation
function is integrated with any full duplex sound card. Compliant
to Microsoft Telephony
Application Programming Interface (TAPI).
Low Power Consumption Due to Green Power
Management and No Redundant High Speed Chipsets.
With no redundant high speed chipsets
such as Data Pump (or DSP), UART, SRAM and ROM found in most
high speed data/fax modem board, and Green power management, power
consumption is significantly reduced.
Your Modem Includes:
Cheyenne Bitware Software for Voice/Fax Communications
Driver Diskettes for Pentium, Pentium MMX, AMD, and Cyrix
Hardware Manual
Software Manual
Telephone cable
K56 Flex /V.90 Lucent Chip Set
PCI Modem $58.00
CLOSE OUT X2 /V.90 (USR Compatible)
56K Internal Voice Modem
, ESS Chip set (Requires Win95/98) $55.00
Part# MOD 56x2 ESS .6 Lbs.
K56 /V.90 Internal ROCKWELL
CHIP Voice/Fax Modem, True V90 ISA $61.00
Part# MOD 56F POW 1.9 Lbs.