Vinyl siding is a popular alternative against regular painting. Its offers comparably more durability and appealing looks. This long lasting measure is affordable and easy to maintain. Vinyl siding installation Ottawa offers protection against peeling, rotting and wall discoloration for many years. For these reasons, it's becoming the first choice of people who want to save money without compromising with surface quality.
Few easy steps in installing vinyl sidings are:
1. Pre Planning: Like all other projects, these sidings require pre planning before the actual starting of the process. The plan includes expansion and contraction mechanism in which a gap of ¼ inch is nailed. Corrosion resistant stainless steel nails are diving straight between the head and siding for expansion purpose.
2. Cutting: The second most step is to cut each of the strips into equal size. The most common ways of cutting are:
a) Aviation and Tin Snip: Make a cut at the top interlock and move downwards, till the bottom of the panel is reached.
b) Utility Knife: It is used to score panel. Bend it back and forth, till the panel snaps fully.
c) Radial Arm Saw: It involves cutting with a fine tooth blade in a slow manner that reduces chipping and increases smoothness.
3. Surface Preparation: It's important to clean and prepare the wall surfaces before installing vinyl sidings. This step includes:
a) Nailing the loose boards and wood trim
b) Replacing the rotted boards
c) Scraping off the old caulking
d) Removing lighting fixtures and down spouts
e) Cut or tie the surrounding herbs and trees.
4. Insulation: Its highly recommended to install, insulating vinyl sidings in Ottawa. They are helpful in insulating and leveling out the home exteriors. The most commonly opted insulated sidings are house wrap and sheathing insulation.
5. Installation: After completing all these steps, your vinyl installation contractor will come towards the final process. Steps involved in installation are:
a) Starter Strip: This is the first strip to be installed. Use a chalk to mark a line at the starting of the lowest corner of the wall. Nail this strip along the surface and continue installing the starter strips around the wall base.
b) Corner Posts: Corners are often difficult to carry work and need special care. Straighten up the corner posts and nail them to the adjoining walls in the top to bottom manner.
c) Install Siding Panels: Nail the bottom of the first panel into the starter strip. Start the process from the back of the house and then, come towards the front.