Paint Frame and
Engine: When painting the frame of the car you must have
as to what you want your car to look like. If you are going to want
a two tone paint job you must tape all the parts that you want to be in
another color. Then with the spray paint gently tape the top of the
spray can to have a nice coat of paint. When painting the engine you must
brake off the pieces that you want to paint or detail. You also have to
gently tape the top off the spray can when painting the engine.
Engine Assemble: When you assemble an engine you have
to pay attention to the planner and do every little detail. You have to
follow every little detail that the planner tells you to, because if not
the slightest thing can make the engine not fit in your axle.
Axle, Shock, and Interior
Assemble: When you assemble the axle and shocks you have
to really pay attention because if you don't glue them on correctly the
car may become tilted to one side. Assembling the interior is the easiest
part when building a model, all you have to do is look at the planner and
you will be done in less then five minutes.
Detail frame: To detail the frame you must get the color
that you would like, paint the outline of your model. After this
with a very thin brush you can paint the outline of the car. When
you paint the outline of the car you have to be very careful not to leave
any bubbles of paint.
Finish: When you are done with all of the assembling and
painting you can put on the tires and clean the paint and make sure that
there are no finger prints on the paint.