My Favorite things about Angelfire.
My Favorite Web Sites
Angelfire - Free Home Pages
Free Web Building Help
Angelfire HTML Library
HTML Gear - free polls, guestbooks, and more!
1992 Chrysler LeBaron convertible, 3 liter eng
1C3XU4536NF272168
I trying to replace the two rubber fuel line hoses that connect the fuel lines from
the tank (lines coming up into the engine compartment) to the fuel lines which come
from the engine. The lines are steel, one line is 5/16, the other is 3/8
The rubber lines connect to the steel lines with a quick disconnect.
I have received this information so far
Dorman Products makes replacement QD parts and repair pieces. Advance
Auto usually has some in stock.
http://www.summitracing.com/search/Part-Type/Fuel-Line-Repair-Kits/
http://www.autobarn.net/mom800300.html is a master kit.
https://www.dormanproducts.com
I "guess" that the two Dorman parts I want are 800-120 and 800-121
How do I fabricate this line, OR better, aren’t these available as complete
assemblies somewhere? Is there a special crimping tool and crimp piece I need?
Picture #1shows both lines connected. You’ll see the two quick disconnects were removed from
from the engine side of the lines. They were shot. They are currently
held in place with clamps.
The two rubber fuel lines
bend up and then go down to connect to the tank side fuel lines.
Picture #2 is a close up of the quick disconnect..
Picture #3 is a close up of the metal fuel line coming up from the tank.
Picture #4 is a general area picture. One of the rubber fuel lines has been disconnected
to show the quick disconnect.
