Installing the Titan gasket:
Things to do and not do:
- DO Keep everything CLEAN.
- DO RETORQUE. See Below
- DO NOT use any sealers or sprays!
- DO NOT over torque! - 80ft/lbs with ARP moly lube is recommended by ARP on the instructions with the studs.
- DO Read instructions that come with the gasket.
- DO check that head and block are flat.
RETORQUE: Warm engine to nomal temp. Let cool (2-3 hours). Loosen (about 90deg.s) one nut at a time in the torqueing order shown, then tighen to the full torque.
Go To:
Home
Email: TURBO_BOOSTED@HOTMAIL.COM