|
    
-
Stationary Decoder - About
85% complete. Supports 7 modes of
operation, accessed with Configuration
variables
- STATIC mode - Ability to turn on driver
for CLOSED or THROWN outputs on any
channel
- PNTRG - Pulsed output, not
retriggerable, on any output, CLOSED or
THROWN
- PTRG - Pulsed output,
retriggerable, on any output CLOSED or
THROWN
- CROSSG - crossing guard output
- LIGHTS - Ability to turn on drivers for
both CLOSED and THROWN outputs on any or
all channels
- ALT - Alternation output, similar to
Crossing Guard, except that the default
output is illuminated for TWO clock
periods and the opposite position is
illuminated for a SINGLE clock period.
This is used for track displays.
- BLINK - Blink the output, CLOSED or
THROWN on any channel or all channels.
This is used for track displays.
-
Function - Only decoder -
Control the light in a single piece of
rolling stock, usually a passenger car.
OFF, BRIGHT, DIM
-
Function - Only decoder -
Audio control - Train whistle for
approaching a crossing, a passenger station
acknowledging a signal etc. Diesel engine
sounds. Locomotive bells etc.
-
Stationary Decoder -
Automatic train stop
-
Stationary Decoder -
Traffic Signal controller - This module
will not only set the signals properly, but
will be able to detect when there is an
indicator malfunction. This is critical if
ATS is to work like the prototypes.
-
Stationary Decoder -
Central Traffic Control ( CTC )
-
Stationary Decoder - Track
Layout Display controller
|
|
