 |
|
 |
Z18 Z30 Z303 Z402 Z403 |
|
Standard Features |
- Adjust to any frame height and width.
- Fully Adjustable struts.
- Easy-position cross member 2" forged king pin, 3-1/2" also available.
- 4 minute operation for detachment.
- Extreme forward mounting position optimizing front axle weight.
- Compatible with all suspensions including air bag.
- -21" to 80" tilt range 0deg. load.
- 5 pair frame forks, 2 pair receivers including height adjustment.
- Lanyard control and lever control, power extension, retractions, lift and tilt.
- Hydraulic load holding valves.
- Nylatron slide pads with wear adjustment.
- Million mile Timkin roller bearing in critical pivot hub.
- 3-stage models engineered from Weldox 100.
|
|
|
 |
|
Forward transfer of mounting beam puts downward pressure on kingpin. |
|
Optional Equipment |
- Wheel lifting assembly
- Wireless remote control
- No-charge for 12/24 volt pump power pack
- Cable guide for auxiliary winch
- Winch mounting platform
- Air shift PTO/pump
- Trailer/fifth wheel hitch
- 5” and 10” height extenders
- Locking spring forks
|
| |
|
Model # |
Z18 |
Z30 |
Z303 |
Z402 |
Z403 |
|
|
Lift rating |
18,000 |
32,000 |
32,000 |
40,000 |
40,000 |
|
Tow rating |
85,000 |
85,000 |
85,000 |
100,000 |
100,000 |
|
A. Retracted Distance |
52" |
58" |
55" |
58" |
61" |
|
B. Reach |
86" |
100" |
115" |
100" |
135" |
|
C. Reach W/12" Bus Extensions |
98" |
112" |
127" |
112" |
147" |
|
D. App. reach, center of axles to forks |
141" |
155" |
170" |
155" |
190" |
|
E. Distance from tailboard when stored |
10" |
11" |
11" |
12" |
12" |
|
F. Upward tilt, max lifting height |
22deg. 62" |
22deg. 65" |
22deg. 71" |
22deg. 65" |
22deg. 80" |
|
G. Tilt below ground |
8deg. 11" |
8Deg. 13" |
8deg. 15" |
8deg. 13" |
8deg. 21" |
|
H. Downstroke on lift cylinder |
17" |
17" |
17" |
17" |
17" |
|
Weight |
2207 |
2388 |
2561 |
3350 |
3914 |
 |
|
The exclusive mounting clamps can be left in place when the Zacklift Fifthwheeler is removed in the 4 minute drive operation. Or, mounting hardware unclamps with the turn of bolts for complete removal or move to multiple trucks. |
 |
|
The Zacklift Fifthwheeler does not require welding or drilling. All mounts can be moved between multiple trucks. The exclusive clamping system allows for repositioning of Fifthwheeler location at any time. |
|
Exclusive Features |
- Every heavy duty Zacklift can be permanent or fifthwheel mounted.
- Offering 40,000lb 147" Z403, 32,000lb 127" Z303,
112" Z30, or 18,000lb Z18.
- The FIFTHWHEELER can be mounted on multiple trucks or later wrecker or chassis mounted.
- Deeply angled adjustable struts divert mounting away from any obstructions.
- Forward transfer of mounting beam puts downward pressure on kingpin.
- 30deg. tilt range can be positioned below & above ground as required.
- Flat to ground 0deg. load angle.
- FIFTHWHEELER mounts on any height or width of frame and any position of fifth wheel plate.
|
| |
Bardroff's ZACKLIFT Sales
16565 Santa Fa Trail
Leavenworth, KS 66048
Phone 877-351-3314
Fax 877-351-3314
|
 |
|
|
| | | |
|
