| E-3 Sentry (AWACS) | |
|
 |
|
Mission Features The E-3 fleet will complete its largest upgrade in 2001. Known as the Block 30/35 Modification Program, the upgrade includes four enhancements: Electronic Support Measure for passive
detection, an electronic surveillance capability to detect and identify
air and surface-based emitters. Joint Tactical Information Distribution
System to provide secure, anti-jam communication for information distribution,
position location and identification capabilities. An increase in the
memory capability in the computer to accommodate JTIDS, EMS and future
enhancements. Global Positioning System, a satellite-based positioning
capability to provide precise global navigation. The radar and computer subsystems on the E-3 Sentry can gather and present broad and detailed battlefield information. Data is collected as events occur. This includes position and tracking information on enemy aircraft and ships, and location and status of friendly aircraft and naval vessels. The information can be sent to major command and control centers in rear areas or aboard ships. In time of crisis, this data can be forwarded to the National Command Authorities in the United States. In support of air-to-ground operations, the Sentry can provide direct information needed for interdiction, reconnaissance, airlift and close-air support for friendly ground forces. It can also provide information for commanders of air operations to gain and maintain control of the air battle. As an air defense system, E-3s can detect, identify and track airborne enemy forces far from the boundaries of the United States or NATO countries. It can direct fighter-interceptor aircraft to these enemy targets. Experience has proven that the E-3 Sentry can respond quickly and effectively to a crisis and support worldwide military deployment operations. It is a jam-resistant system that has performed missions while experiencing heavy electronic countermeasures. With its mobility as an airborne warning and control system, the Sentry has an greater chance of surviving in warfare than a fixed, ground-based radar system. Among other things, the flight path can quickly be changed according to mission and survival requirements. The E-3 can fly a mission profile for more than 8 hours without refueling. Its range and on-station time can be increased through inflight refueling and the use of an on-board crew rest area. The aircraft are used as a surveillance asset in support of counter drug missions. U.S. Customs Service officers may fly aboard the E-3 Sentry on precoordinated missions to detect smuggling activities. Background Air Combat Command has 28 E-3s at Tinker, two at Elmendorf AFB, Alaska, and one at Kadena AB, Japan. Pacific Air Forces has four E-3 Sentries assigned to the 961st Airborne Air Control Squadron (AACS), Kadena AB and the 962nd AACS, Elmendorf AFB. NATO has acquired 17 E-3A's and support equipment. The first E-3 was delivered to NATO in January 1982. The United Kingdom has seven E-3s, France has four, and Saudi Arabia has five. Japan has four 767 AWACS. E-3 Sentry aircraft were among the first to deploy during Operation Desert Shield where they immediately established an around-the-clock radar screen to defend against Iraqi aggression. During Desert Storm, E-3s flew more than 400 missions and logged more than 5,000 hours of on-station time. They provided radar surveillance and control to more than 120,000 coalition sorties. In addition to providing senior leadership with time-critical information on the actions of enemy forces, E-3 controllers assisted in 38 of the 40 air-to-air kills recorded during the conflict. The data collection capability of the E-3 radar and computer subsystems allowed an entire air war to be recorded for the first time in the history of aerial warfare.In March 1996, the Air Force activated the 513th Air Control Group, an AWACS Reserve Associate Program unit, which performs duties on active-duty aircraft. During the spring of 1999, the first AWACS aircraft went through the Radar System Improvement Program. RSIP is a joint U.S./NATO development program that involves a major hardware and software-intensive modification to the existing radar system. Installation of RSIP will enhance the operational capability of the E-3 radar electronic counter-measures, and dramatically improve the system's reliability, maintainability and availability. U.S. installation is RSIP is scheduled for completion in fiscal 2004. General Characteristics |