secret nokia

*#06#
To view IMEI (International Mobile Equipment Identity) number enter

*#3283#
To view Week and Year of manufacture enter

The last two digits are the year. If the year is 95, the first two digits are the month.
For 96 the first two digits are the week of the year.

*#170602112302# or *#9999#
To view the software version on 2110e / 2110i

» BACK TO TOP

*#06#
To view IMEI (International Mobile Equipment Identity) number enter

*#3283# [*# D A T E #]
To view Week and Year of manufacture enter

The last two digits are the year. If the year is 95, the first two digits are the month.
For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter
*#170602112302# or *#9999#

On newer phones, the code has been changed to *#682371158412125#

» BACK TO TOP

*#06#
for checking the IMEI (International Mobile Equipment Identity)

*#7780#
restores Factory Settings..(Memory, language, counters not included)

*#3110#
for checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#]
Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK): Displays the Month and Year of Manufacture (0997)
7332 (OK): Displays the date of the last repair - if found ('DATE NOT SAVED'...)
7832 (OK): Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK): Displays Serial Number
37832 (OK): Set the Purchasing Date MMYY (Warning: You can only do this once
- So be careful ...)
87267 (OK): Transfers ALL phone numbers, pictures, sounds from one phone to another (e.g. if broken) with 6110 u can transfer all data via IRport. (Confirm Transfer?)

Fast silent mode
In the newer versions (v.7.11->) a quick silent mode can by entered.
Press Menu then #.

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.

» BACK TO TOP

*#06#
or checking the IMEI (International Mobile Equipment Identity)

*#0000#
hows the SW version.

*#3370#
Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370*
Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720#
Half Rate Codec activation. It will automatically restart.

*#4720*
Half Rate Codec deactivation. It will automatically restart.

*#746025625#
Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology.

This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up
more space on the network, so they can charge you more) - Talk-time is reduced with about 5%.

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them.
- Will give you 30% longer talk-time.

Sim Clock Stop : *#746025625# apparently only works for 3 minuts.

*#92702689#
takes you to a secret menu with 6 choices

1. shows the serial nr.
2. shows when the cel phone was made mmyy
3. shows when the the cel. phone was purchased mmyy
4. shows how many times the cel. phone has been repaired.
5. makes u capebel of transferring user data if u have the gear for it
6. hows how many houres the phone has been on

» BACK TO TOP

Enhanced Full Rate

For activation enter *#3370#
For deactivation enter *#3370*
In both cases the phone will automatically restart.

Firmware check

*#682371158412125#

Service codes

*#0000# or *#9999# (Not Tested)
1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.

*#92702689# or *#92772689#
Display the phone's software version.

SIM Clock Stop
*#746025625#

» BACK TO TOP

*#06#
for checking the IMEI (International Mobile Equipment Identity)

*#0000#
for checking the phones software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.

*#92702689# [*#war0anty#] Warranty code.

You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

To increase call quality and decrease battery life enter
* 3 3 7 0 # (to turn back enter enter # 3 3 7 0 #

To decrease call quality and increase battery life enter
* 4 7 2 0 # (to turn back enter enter # 4 7 2 0 #

To fast find and dial phone number press <arrow down> and then press 1st letter of name (For John - press 5).

To quickly change phone profile press <on/off> then again click <on/off> till choose needed profile and then hold <on/off>.

To get + p w while display is in digit mode press many times * till needed letter appears on display.

To Check, activate or remove card restrictions

press #pw+1234567890+1 - Provider-Lock status
press #pw+1234567890+2 - Network-Lock status
press #pw+1234567890+3 - Provider(???)-Lock status
press #pw+1234567890+4 - SimCard-Lock status
1234567890(master code) is a 10 digit code, based on the phones IMEI number.

Menu:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4. Displays the date of the last repair - if found (0000)
6. Transfers ALL phone numbers, pictures, sounds from one phone to another (e.g. if broken) with 6110 u can transfer all data via IRport. (Transfer user data?)

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone
( consumes more power ).
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone
( better standby time ).
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

PIN OUTS

Pin-Outs: Bottom view, keyboard up, counting from the left

V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12

1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Power Button Tip:

If you press the button for a short moment, the menu with the profiles is shown on the display.

If you press one more time, the mobile turns itself off. You can use the up and down cursor keys to scroll and enable a different alert setting.

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.

» BACK TO TOP

*#06#
Check the IMEI

*#0000#
Check software version

Warranty menu *#92702689#

Press the following warranty codes:

6232 (OK) Displays the Month and Year of Manufacture
7332 (OK) Displays the date of the last repairment
7832 (OK) Displays the date where the phone was purchased
9268 (OK) Displays Serial Number
37832 (OK) Set the Purchasing Date MMYY
87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone
to another

» BACK TO TOP

» NOKIA 8810

*#746025625#
Sim Clock Stop (Only works for 3 minutes).

*#0000#
shows the SW version.

*#06#
for checking the IMEI (International Mobile Equipment Identity)

*#92702689# [*#war0anty#]
Warranty code.

You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4. Displays the date of the last repairment - if found (0000)
6. Transfers ALL phone numbers, pictures, sounds from one phone to another
(eg. if broken) 8810can also transfer all data via IRport (Confirm Transfer?)

» BACK TO TOP

» NOKIA 9110

*#06#
Check the IMEI (International Mobile Equipment Identity)

*#0000#
Show software version.