To set the reel seat you can use one of the following methods,cork tape,string,cork/graphite bushings.
Once the blank is built up so that there is just enough room to get the reel seat on,As you must remember that the glue is going to ooze out onto the rear grip so be prepared and clean as you go.
Here is the glue for that.masking off your rear grip a head of time, so when the glue runs which it will,should help in the cleanup effort.
You should allow your glue to set overnight and be ready for the fore grip which you can set just as the rear grip.
In your quest to build your own fishing rods.
Send your questions and/or request
for free info.
Monday, 22-Jan-2018 12:05:22 EST
© LAST UPDATED:October 12,2003