create your own wall mounted serverok greg and ian will have pictures soon. first step is to aquire a case. we picked a metal 8 inch wide by 2 foot high custom case. we then cut it to 3 inches wide by using a hack saw (we're using a small CPU so we cut to 3 inches. I strongly suggest cutting it 4 to 5 inches thick.) once we cut it in half we measured starting from the top front back about 6 inches to remove the bulky hardware mounting peices (once again cut less than we did because we're using a Micro ATX and a 200 watt micro power supply.) we then mounted a hrdware mount that held 3 hardrives and a floppy. you will only need the CD once and thats to install the Operating SYS. now for the tricky part since you need a cover for your PC get some plexy glass and cut it to cover the case side and tape, glue, screw, or melt it in place (dont forget the stuff that goes inside)!
|
Vacation Pictures
Put in pictures from your last vacation. |
Friends
Show off your friends. |
Friends
|
