DIY:MAKE YOUR OWN SPINNING WHEEL SQUIRREL FEEDER

http://www.angelfire.comempire/fkhanover/
fkhanover@webtv.net

WWW.FREDKESSLER.COM

Construction is simple.Use pressure treated lumber and this project will last for years.Here's the part and size list.But you can always alter things to suit your needs.

BASE PLATE

...A piece of 1"x6"x6"

HANGER

...A 12"piece of 2"x2".cut to 4"and 6"

4 ARMS

... 12" long made from 1"x2".

SCREWS

...Two 4"or longer.Use these to mount the hanger

Eight 1½" screws to mount the arms to the plate.

Four 2½" to hold the corn.This seems to be the right size.Too short,the corn falls off.Too long and it takes forever to unthread empty cob and replace.

One 3¾" carriage bolt that holds the base plate to the hanger.Do not over tighten,washers could be used,but not a must.Mine's kinda loose so it spins easy.

Save on wood!!!!! Make 3 arm version with a triangle base plate.I sell both types for $10.FREE SHIPPING in the U.S.

fhanover@webtv.net