
Feedback from customers Orders & Information
Do it yourself Reel to reel for sale.
* Spec's & Photos *
---------


A classic from 1970.
4-track, 2 channel stereo. Speed: 3-3/4 and 7-1/2. Up to 7 inch reel-size.Automatic reverseTape tension selector switchSound on Sound.

3 motors with belt-driven capstan.4 heads, 4-track 2-channel.Wow and Flutter: 7-1/2 0.12 %
3-3/4 ips 0.15 %
Fast winding time: 90 sec for 1200 feet tape.Frequency response:7-1/2 ips, 30-20.000Hz.
3-3/4 ips, 30-15.000Hz
Signal to noise ratio: 50 dBCrosstalk: 50dBRCA connections for input and output +DIN connection.

Headphone jack 1/4 inch(2) microphone jacks 1/4 inch.Soft touch buttons for transport.Tape/Source monitor switchCapable of mono/stereo playback.Dimensions:17-1/4. Wide
17-1/2 Tall.9-3/4 Deep.Weight: 45 lbs.Voltage-selector: 110-115-200-220 volt, 50/60Hz.


Hyperbolic heads offers better recording and play because only a small portion of the head touches the tape.
Each head has its own seperate use: Erase,Record,Forward Play,Reverse Play.
Since the heads are mounted on a base plate and never move like some other models,
no misalignment can occur.


4010 S has three motors, 1 capstan and 2 for the reels.
All drive mechanisms are controlled electrically, no idler-wheels or gears.
A tape can even be reversed in the fast mode of operation without first stopping the tape.
The control system is completely solenoid operated which allows a smooth tape travel.

Solenoid operated brake system with felt-pads around each reel-table.


Each channel has seperate record / playback preamps.
Easy to disconnect and service by just sliding outthe amp-section from the cabinet.

Accessories for sale:
Owners Manual
Service Manual
Used parts, reel-motors, capstan motor, amp-section, knobs, transformer.
Pictures © Vintage TX
