Untitled Document



		The process to build an automatic gate, is based in the best method and high quality hardware and materials adjusted to your convenience and your budget. 1:Apointnament With the information that you have given us by the contact area or by phone, we visit your house to discuss the specifications of the area where you will like your automatic gate and set the post
		2:Foundation After the apointnament, the next step is to "set the post" we dig our hole for the inch post five feet's deep (5 feet's) this is more than the competence and enough to guarantee that your gate will never sag as long you own’ it. 3:Build The metal is cut at the exact Merton to custom build your gate, and then we presion wash with steam water cleaning the materials leaving it ready to begin to build your gate taking soo much care for all details , when is already done is acid-wash again and covered with an anticorrosive coat of primer.

		4:Paint The paint process is formidable; the gate is completely submerged in an especial paint tank making sure that every little spat cover with paint, (this process is called deeping) .When the gate is dry is covered again with another coat of spray paint, and now is ready for theInstallation.
		5:Installation With all the material and hardware ready, we install the automatic gate checking the last details, painting the posts and connecting the gate opener to the gate, leaving your automatic gate ready to work and protect your home. The process from start to finish will take approximately from one to two weeks