See the 'x' thing in the barrel? pull or pry that out with a screwdriver or something if you want to fire micros. If you want to fire megas saw off an inch of the barrel.
Open up the gun. inside there is a tube with a spring inside. There will be an orange clip to hold it in to the tube. Take the clip off. Now stretch the spring and put everything back together.
Electric Eel Mods
In the clip there are 'x's where the air goes into each of the chambers. Take those out with a knife or a screwdriver, etc.
Where the air goes into the clip there is a rubber thing with an 'x' in it. Pull it out with pliers. Cut out the 'x' but don't destroy the thing, you'll need it later. Now, just put the thing back in and you are done.
Supermaxx 1500 Mod
Open the gun. take out the pump and you will see holes on the end. These are evil so plug them up with duct tape or hot glue. Close the gun.
