Site hosted by Angelfire.com: Build your free website today!

If you are 1 of numerous motorcycle fans who enjoy operating on bikes, then think about obtaining a motorcycle jack. It’s a single of the most essential instruments to have the garage in purchase to safely and securely work on bikes.

A bike jack is a scaled-down edition of a motorcycle jacks used for repairing cars and trucks or trucks, but bike lovers are constantly warned not to use regular jacks on their bikes. These jacks are produced up of crisscrossing steel which can be rolled under the center of a bike. The upper element of the jack is elevated hydraulically to touch the undercarriage and raise the complete motorbike.

Jacks made for motorcycles can be employed in standard preservation projects like shifting the oil, as properly as in doing modifications like installing shocks or painting the total unit.

For the sake of security, a good ATV bike jack ought to have these two features:


A security lock that will never ever allow the accidental launch of the jack and can drop the motorcycle on whoever is functioning on it and


Some type of strap or tie-down that goes up and around the motorcycle and locks it to the jack. This permits any individual doing the job on the bike to wrench on it or even stand on possibly conclusion of motorcycle with out worrying that it would tip.

It is not tough to seem for motorcycle jacks that have these functions, because most manufacturers consider it their responsibility to make their solutions safe and sound to use. Most bike jacks readily available in the industry have these two basic safety characteristics.


The following are some issues to preserve in intellect though employing a bike jack:

Avert the motorbike from rolling off the jack stand by placing a block of wood guiding rear tire.
Hold the middle the jack, for the Motorcycle lift of the down place, underneath the motorcycle’s block.Avoid bikes from falling onto their sides when it is elevated by utilizing a lengthy rope to attach just one stop of the handle bars, up above the garage’s rafters, and the other stop of the deal with bars.
To increase the motorbike off the ground, flip the jack’s hydraulic launch valve in the direction of the appropriate. Pump the jack take care of frequently until finally the motorbike is at the peak you want.
To decreased the motorbike to the ground, turn the hydraulic release valve very little by little to the left until finally you can slide the jack out from beneath the bike.