# $Id: pnpdump.c,v 1.15a 1998/05/25 17:22:16 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier 0f ff ff ff ff 00 08 a8 65
# Board 2 has serial identifier e6 00 00 01 00 19 02 6d 22

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)

# Card 1: (serial identifier 0f ff ff ff ff 00 08 a8 65)
# Vendor Id YMH0800, No Serial Number (-1), checksum 0x0F.
# Version 1.0, Vendor version 0.0
# ANSI string -->YAMAHA OPL3-SAx Audio System<--
#
# Logical device id YMH0021
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE YMH0800/-1 (LD 0

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
(IO 0 (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0530
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
(IO 1 (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
(IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
(IO 3 (BASE 0x0330))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0370
#             Maximum IO base address 0x0370
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
(IO 4 (BASE 0x0370))
#       IRQ 5.
#             High true, edge sensitive interrupt
(INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
(DMA 0 (CHANNEL 0))
#       Next DMA channel 7.
#             16 bit DMA only
#             Logical device is not a bus master
#             DMA may not execute in count by byte mode
#             DMA may execute in count by word mode
#             DMA channel speed type F
(DMA 1 (CHANNEL 3))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0240
#             Maximum IO base address 0x0240
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (BASE 0x0240))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0e80
#             Maximum IO base address 0x0e80
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (BASE 0x0e80))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0300
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (BASE 0x0100))
#       IRQ 5, 7, 9, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0 or 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 7.
#             16 bit DMA only
#             Logical device is not a bus master
#             DMA may not execute in count by byte mode
#             DMA may execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 7))

#       Start dependent functions: priority functional
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0f48
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0334
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (BASE 0x0100))
#       IRQ 3, 5, 7, 9, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))
#       First DMA channel 0, 1 or 7.
#             8 & 16 bit DMA
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 7.
#             8 & 16 bit DMA
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 0))

#     End dependent functions
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Card 2: (serial identifier e6 00 00 01 00 19 02 6d 22)
# Vendor Id HSM0219, Serial Number 256, checksum 0xE6.
#     Version 1.0, Vendor version 0.1
#     ANSI string -->LT Win Modem <--
#
# Logical device id HSM0a19
#     Device support I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

# (CONFIGURE HSM0219/256 (LD 1

# Multiple choice time, choose one only !

#     Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03e8
#             Maximum IO base address 0x03e8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x03e8))
#       IRQ 10.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 10 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03e8
#             Maximum IO base address 0x03e8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x03e8))
#       IRQ 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 11 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03f8
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x03f8))
#       IRQ 3, 4, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03e8
#             Maximum IO base address 0x03e8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x03e8))
#       IRQ 3, 4, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x02e8
#             Maximum IO base address 0x02e8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x02e8))
#       IRQ 3, 4, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x02f8
#             Maximum IO base address 0x02f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (BASE 0x02f8))
#       IRQ 3, 4, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))

#     End dependent functions
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0100
#         Maximum IO base address 0x03f8
#         IO base alignment 8 bytes
#         Number of IO addresses required: 8
# (IO 1 (BASE 0x0100))
# (ACT Y)
# ))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)