Best viewed
with display settings at: 1024x768 with Fonts at 125%
We are
interested in buying following items from domestic
manufacturers
1
Coffee Pots (also known as:
Decanters) - Made from Heat-Resistant
Boro-
Silcate Glass
and be able to
withstand temprature up to 200º Centigrade for
extended period of time
Capacity:
1.9
Liters
These Pots are
kept
on an hot-plate (also known as: Warmer), to keep the
brewed
coffee at approximately
90º
C. The temprature
of
hot-plate is around: 150º C. Weight of the
Pot (including the handle) should
be: 360 to 390 gms
2
Filter Papers - Cut
and Flutted to fit the Basket of our Drip-Type Coffee Brewing
Machine. 50 of
these flutted papers
are
stacked together for shipping. The Specifications are:
Diameter of Flat Circle:
246 to
250 mm
Weight of 50 pieces Stack:
80.2 gms
GSM (grams per square meter):
33.70 to 34.4
Shaped and Flutted
item's
Diameter of Bottom
Circle: 110 mm
Dimension at
Top:
165 mm (approx)
Height:
68 mm
Number of
Flutes:
24
We are currently
buying this item from a dealer in USA. We don't
have additional specifications
on type of filter
paper which is used, but can provide samples for analysis
These filters are generally listed as: 250 x 110 or
25 x 11 (that is
diameter of Flat Circle
and Diameter of Bottom Circle in
mm or cm respectively)
Single
Flutted
Filter
Paper
50 Pieces
Stack
The Flutted
Filter will be placed in such-like Holder
3
Mugs - Stoneware in two
sizes: 330 mland 180 ml.
Color - Red
on
outside and White
inside. To be
printed on both sides
with Minerva
Coffee ® logo in Black Color by Transfer process.
The
Red color for stoneware is very close to
Pentone 200C
(from: Coated Paper Color book). We
will provide swatch for
color-matching
If you can not offer
the Red color, then we may consider buying the mugs in Pure White
color. The logo
printing
in this case will be in Red color
At a later date, we
will be buying
cups made from Bone China
Our cups are slightly
bigger than
the sizes shown below. Furthermore, shape of both
cups is
quite different than
the one shown
below
4 Cups - Paper for Hot
Drinks (polycoated). Size: 180
ml.
To be printed with Minerva
Coffee®
logo in Black Color on
Red color
printed paper. The
Red color is very close to Pentone 200. We
will provide swatch for
color-matching
5
Lids for above cups, made
from white color plastic . We would prefer a design, which has a
pull-tab to open a
hole to
facilitate drinking, while the lid is in place
6
Cups - Styrofoam. Size: 180
ml. To be printed with Minerva
Coffee® logo in Red color.
The Red color is very close to
Pentone
200. We will provide swatch
for color-matching
If you are interested in supplying any of the above items,
then please contact