FIBREGLASS BODY PARTS
The sleek body style is made from brand new patterns and molds, designed and built specifically for the STALKER, by Dennis Brunton , who brings some 30 years of experience gained in motor racing ( both motorcycles and midgets)as well as aircraft and sailboat building, to the project. The distinctive one piece hood / nose is not only aestheticaly pleasing, but functional. All routine maintainance can be done with the hood open, and for more intensive "race prep", 2 pins release the hood which is very light, and can be easily handled by 1 person. The air "scoop" isolates the intake from the engine compartment, so the engine 'breathes' only cool outside air.( Approximately 2% of engine power is lost for every 10 deg F. increase in intake temperature )
SUSPENSION
The STALKER "Space Frame" chassis, is fitted with Unequal length, Double Wishbone front, and 4 link parallel trailing arm rear suspension, centered by a cross frame Panhard Rod. These features, coupled with the 10 1/2 " vented discs, and 7 1/2 ", 10 Bolt Rear (courtesy of the S10/15 donor), Spax Coil Over shocks and precise Rack and Pinion steering, provide a very economical, but effective handling package....
REAL RACECAR PARTS !!
THE KNEE BONE'S CONNECTED TO THE THIGHBONE!!!!.......
Some Vital Statistics.....
Wheelbase ....92/93 "
Track 54" on road wheels..some variations on race wheels.
Weight ...Wet ..1/2 tank gas ..race wheels 1406 # Road wheels 1440 #
Engine Stock 3.4 with Holly BBL and Bruntonauto headers.. 190 bhp/205 ft/lbs
Cam and rockers can easily bump this to well over 200 HP