HENDERSON LUMBER MILLS
Site hosted by Angelfire.com: Build your free website today!


Henderson Lumber Mills, Inc.

 
195 First Street
Jersey City, New Jersey 07302-2908
201-659-8000 Fax: 201-659-7799
 
 
Click onto a word in the boxes below to view those areas.
Cutting 
Special Orders
Facility
 Hours 
Products
Delivery Policy 
 We Help
added value: Doors
added value: Locks 
Payment 
 Click onto a word in the boxes above to view those areas. 
The local lumberyard with a difference.
Fast service, Fast delivery, top quality and added value.
Open 6 days
Monday - Thursday: 7:30 AM - 5:30 PM
Friday: 7:30 AM - 3:00 PM
Saturday: Closed
Sunday: 10:00 AM - 2:00 PM
Top of Page
In-Store Services
We Deliver:

If  we sold it to you we can deliver it to you.  No order is too small, no order is too big.  Orders under $400.00 are delivered for a nominal charge of $20.00 within 1 mile of our shop, $30.00 within Hudson County, $75.00 plus tolls for New York City and Staten Island.  Shipments over $400.00, but within Hudson County are free. Shipments over $1,000.00 are free within 40 miles of our shop within  State of New Jersey.  Shipments over $10,000.00 are free within the State of New Jersey.  The same policies apply to out of state shipments, but tolls however, are billed at cost.  All of our trucks are equipped with dump mechanisms, so if your material is suitable for dumping onto your job site, it can be done at no additional cost.  All deliveries are defined as "Sidewalk Delivery", which means that it is the customer's responsibility to get the material into his house.  We will only get the material off the tailboard of the truck.

Top of Page
 
We Cut Corners, but in a good way....

We have all the necessary equipment to service the products we sell.  We cut lumber, we cut plywood, we cut drywall, we cut acrylic sheets.  We even cut doors,  and when your needs require cutting a door beyond its designed width or height, we even rebuild them to be as good or better than they were when they came from the factory.

We don't just cut keys, we duplicate them with either a conventional cutting machine, or cut by code (without the original).
 

 Top of Page
 

 

We duplicate high security keys as found in Mul-T-Lock, BMW, Lexus, Mercedes, Saab, Volvo, Infinity, etc. We can even duplicate VATS, PATS, PASS and  transponder keys that can be programmed in our shop, no need to have your car do the programming, and risk voiding a key, no need to pay a dealer over 3 times what we will charge you.
Top of Page
We order it:

Need something we don't have?  We can and will special order it for you.  We won't take advantage  of you by pricing specials at higher margins than the regular goods.  We do it quickly, efficiently, and give every special order the attention they deserve.

We Help

You don't have to lug your purchases around the block, or from one end of the building to the other.  Tell us what you want, pay for it, and we will gladly bring it to your vehicle, load it and tie it securely for you.

Top of Page
 
Special Services
Doors:
 
When a commodity size door won't do the job for you, we can help.  We can make virtually any size door, in our fully equipped door hanging shop.  Our skilled craftsmen can provide you with custom sized doors, custom sized frames, dutch doors, doors with vision panels, twin swing units, angled tops, round tops, shiplapped stiles and rails,   commercial or residential, give us your specs, we will surprise you with our capabilities.  At Henderson Lumber you can have it your way.
  ; ; ; ;

Locks:
 
There are so many variation in lock types and function, simply unavailable at at regular lumberyard, you must really think through your requirements, so that you buy the right product.

We stock: dummy sets, passage lock sets, privacy lock sets, entry lock sets,  storeroom lock sets, classroom lock sets, mortise lock sets, single sided dead bolts, double sided dead bolts, pad locks slam locks,  UL listed lock sets, handicapped approved lever sets.  In a variety of finishes, a variety of back sets, in a variety of keyways.

We service everything we sell.  Would you like to have your new lock keyed to your existing key? We can do it while you wait.  Would you like to have every lock keyed differently, but 1 master to open everything? We can do it while you wait.
Do you have more than 1 location, and would like to create several levels of masters, so that 1 master opens each location, another master opens each section, and yet a third opens everything.  We can't do that while you wait, but can turn it around in a day or two depending on the level of sophistication you require.  Do you change locks often, because of lost keys, breached security.  We can configure a lock that can provide 3, 4, 5 or even 6 key changes by turning a key, no need to remove the lock until all combinations are used. Kwikset, S. Parker, Ultra, Schlage, Arrow, Baldwin, Segal, Corbin, Master, American, Adams Rite, Simplex, Marks, Omnia, PDQ, Mul T Lock, Yale, are but a few of the name brands we stock. Whatever your budget, we stock or can get the lock that meets with your requirements.

Top of Page
 
Products
Click onto a word in the boxes below to view those areas.
Dimensional Lumber 
Drywall Materials and Supplies
Commercial Ceilings
Doors Commercial Residential
Tools 
Power 
Hand
Engineered Lumber
Metal Studs
 Builders Hardware
Masonry Materials and Supplies
Plywood
Roofing Materials
High Security Locking Systems
Click onto a word in the boxes above to view those areas.
 Top of Page
 
Top of Page
 Dimensional Lumber
We carry only grade stamped materials, in Douglas Fir, Hem Fir Spruce and Ponderosa Pine.   Spruce 2 x 3's are available in 8' and 10' lengths, we also carry 5/4 x 3 spruce bridging as well as 1 x 2  and 1 x 3  firing strips.  2 x 4s through 2 x 12 are available in Douglas Fir in lengths from 8' through 26'.   Ponderosa Pine boards, 1 x 2 through 1 x 12, as well as 5/4 x 6 and 5/4 x 12, are available in lengths from 6'-16'
Top of Page
Drywall
 
   Only name brands for sale at Henderson Lumber.  3/8, 1/2 regular and moisture resistant, 5/8 Fire Code and moisture resistant.  Durock, Fiberock and Wonder Board.  Plaster of paris, drywall tape, joint compound, drywall screws and nails, wallboard adhesives, corner bead, j channel all in stock and ready for small or large jobs.
Top of Page
Commercial Ceilings
 
We feature U.S.G. Grid and ceiling tile.  We stock a range of patterns for suspended ceilings in 2 x 4 panels and 2 x 2 panels.  We stock 1 x 1 ceiling tile for staple on applications, as well as melt away ceiling tiles for applications below sprinkler heads.
Top of Page
Doors
 
We stock over 10,000 flush doors in a variety of veneers. Luan, Birch, Oak, Teak, Cherry, and others.  We stock sizes up to 48" x 96".  We stock name brands, such as Castlegate, Premdoor, Madawaska, Mohawk, Nord, Stanley, Tru Stile, to name a few.  We carry flush doors in: solid core, hollow core, stave core as well as fire rated doors in 20 min, 45 min, 60 min and 90 min.  Our doors are built to our specifications, assuring you of a higher quality end product.  Our veneers are premium quality, our rails are double thickness, our stiles are all wood, clear, and double thickness.  Our hollow doors have oversized lock blocks, on both sides of the door.
 
If you found a cheaper door elsewhere, be assured that it's not the same door.  Look at the veneers, the less expensive doors have rougher or photo etched veneers,  they do not absorb sealers readily, and when scratched the surface below is hardboard, not wood.  Look at the stiles, they are probably either finger jointed, or worse yet, made out of fiberboard.  Finger jointed stiles do not offer the strength that a clear stile offers, the hinge area can break free or delaminate from the veneer due to the inherent weakness in the construction.  Fiberboard does not hold screws readily, and therefore the hinges can work free, and cause problems down the road.  The stiles are the part of the door that sees the most work, cheat on the thickness, and ultimately the door will fail.  There are more differences, but the lay person can not see them, the truth is, that while the doors may look alike, they are very different below the surface.  At Henderson Lumber we don't cut corners, we don't sacrifice quality, WE SERVICE WHAT WE SELL.  Whatever has to be done to correct a problem will be done. Our customers are happy with our service, quality, and added value, try us you will be too.
Top of Page
 
We also carry a full line of steel and fiberglass doors, smooth or textured.  The brands we carry are known for quality and integrity.  Names such as, Castlegate, Benchmark, Artek, Premdoor,  Benchmark Commercial, Curries and Pioneer.  The residential doors can be fitted with a variety of glass vision panels from RSL or ODL.
Top of Page
 
 
 Tools
 
 
 
 
Methods of Payment
Cash, Check, Visa, Master Card, Discover, Henderson Lumber Charge, Cash Card (MAC, NYCE,  etc.)
 
 Top of Page
© 1998 - 2007 Henderson Lumber Mills, Inc.
The links listed below are in no way affiliated with Henderson Lumber Mills, Inc., and we can not therefore attest to the honesty or integrity of these links. The user clicks these links at his/her own risk. Our feeling is that the consumer should abstain from entering into any agreement or releasing any financial or personal information to any of these companies. Their affiliations with us, however implied is bogus, and should be dealt with appropriately.