For Immediate
Release
CARPET CARE YOU CAN'T BEAT
In days gone by, carpets and rugs were cleaned by taking them outside,
hanging them across a line, and beating them. Perhaps you remember this
tedious Saturday afternoon chore from your childhood. Our mothers and grandmothers
may not have understood the cleaning technology behind this work, but they
did realize the beneficial results.
The majority of soil in carpet is dry, insoluble, particulate matter.
An analysis by Proctor and Gamble Laboratories of carpet soiling samples
representing a cross-section from throughout the United States reveals
the following data on soil in carpet:
Tracked-in, gritty particles make up approximately 55%. Animal fiber
from people, pets and fabrics comprise about 12%. Another 12% is
vegetable matter and fiber from fabrics, indoor plants, lawn tracings and
paper products. These combines to account for 79% of the soil nestled in
carpet fibers. This soil composition varies with geographic location and
use of the facility.This dry soil is often abrasive and can harm carpet
fibers if not removed. Under the weight and movement of foot traffic, these
particulate soils can scratch and cut carpet fibers, dulling the appearance
of the carpet. Abrasive soil is the major cause of carpet wear.
Today most carpet is installed wall to wall, and clotheslines are becoming
a thing of the past. We can't beat this particulate soil out of our soft
floor coverings, but we can vacuum it out. Frequent, thorough vacuuming
is the most important step in a carpet maintenance program. Routine vacuuming
enhances the appearance and prolongs the useful life of carpet by lifting
the fibers and removing harmful particulate soil.
Proper vacuuming also helps create a healthier indoor environment by
removing pollutants such as dust mites and their feces, discarded human
skin cells that mites feed upon, mold spores and other biological contaminants
collected in the carpet.
The equipment is the first consideration for effective vacuuming. The
Institute of inspection Cleaning and Restoration Certification (HCRC),
Vancouver, Washington, the certifying body for professionals achieving
levels of proficiency in the cleaning, restoration, and inspection industry,
offers these tips on selecting a vacuum cleaner:
-
Upright vacuum cleaners are generally more efficient than canister
models.
-
A top-load vacuum works more efficiently than a bottom-load.
-
The vacuum cleaner head should be equipped with a beater bar or revolving
brush. This mechanical action separates the carpet fibers and lifts the
soil for vacuum removal. This duplicates the agitation of beating the rug
on the clothesline.
-
A dual-motor vacuum, utilizing one motor to operate the beater bar and
one for the vacuum, is most efficient. Mostly found in commercial vacuums.
Some resident vacuums allow the particulates to by-pass the fan, thereby
reducing wear on fanblades.
-
The cleaning objective is to remove as many particles and biopollutants
as possible, not to redistribute them into the air to settle back into
the carpet and furnishings or be absorbed into the respiratory system.
Vacuum cleaners equipped with high efficiency particulate (HEPA) or micro
air filtration systems trap tiny particles.
-
Disposable paper bags are recommended over cloth bags. Cloth bags can become
clogged with soil, reducing airflow through the bag.
-
Replace the beater bar and brushes as they become worn.
-
Have blower fan blades replaced as they abrade.
-
Replace worn or cracked belts.
Vacuuming is such a common chore that little thought is given to
how it should be done. The IICRC provides these recommendations:
-
With vacuuming, more is better. You cannot over vacuum a carpet.
Today's carpets are designed to hide soil, so soil is not always visible.
Studies conducted by Hoover Vacuum Cleaning Company show that one square
foot of carpet can hold up to one pound of dirt and still appear clean.
-
Thorough vacuuming to remove the pile-damaging soil hidden deep in
the carpet takes time. Don't just groom the surface by removing large,
noticeable debris.
-
Adjust the brush or beater bar properly for each carpet height. The
brush bristles should just slightly touch the carpet.
-
Empty or replace the bag often. When a bag is half full, vacuum efficiency
is reduced by 60 to 80%.
-
Overall vacuuming is needed, but knowing where to concentrate your
efforts is more productive. The majority of soil in carpet is brought from
outside by foot traffic, so normally the highest concentration of soil
is in entrances and high traffic areas.
-
Hand vacuum the dust and fine particulate soil that builds up around
the edges and in the corners of the rooms.
Successful vacuuming requires time, proper technique, and effective equipment.
However, even the most meticulous worker with the best vacuum cleaner cannot
remove all the soil in carpet. A small percentage of the soil is oil-based.
This oily residue bonds the particulate soil left from vacuuming to the
carpet fibers and causes the appearance of dirty traffic patterns. Vacuuming
is ineffective against this oily buildup. Removal requires the periodic
service of a certified professional carpet cleaner.
This article has been provided by your local IICRC certified carpet
professional. For further information on proper care of your carpet, call
the carpet cleaning company displaying the IICRC logo on their Web site,
or call the IICRC Referral System at 1-800-8354624 for the name of a certified
cleaner in your area.
|