CPU: • Supports Socket 478 for Intel® Pentium 4 (Northwood) processor • Supports up to 3.6GHz or higher speed • Supports FSB 533/800MHz HYPER-THREADING SUPPORT!!!!

Chipset: • Intel® Canterwood 875P Chipset - Supports FSB 533/800 MHz - Supports ECC memory - Support Single or Dual channel DDR 400*/333/266 memory up to 4GB - Support AGP 8x or 4x at 0.8V (AGP 3.0) or 4x at 1.5V (not support 3.3V) • Intel® ICH5R Chipset - Integrated Hi-Speed USB 2.0 controller, 480Mb/sec, 8 ports - 2 Serial ATA/ 150 ports - 2 channel Ultra ATA 100 bus Master IDE controller - PCI Master v 2.3, I/O APIC - Supports both ACPI and legacy APM power management - Serial ATA/150 RAID 0

FSB: • Support 533/800MHz Intel NetBurst micro-architecture bus.

Main Memory: • Supports 4 unbuffered DIMM of 2.5 Volt DDR SDRAM • Supports ECC memory • Supports up to 4GB memory size • Supports Single or Dual Channel DDR 400*/333/266 MHz and up (*In order to use DDR 400, FSB 800 CPU is required) Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability. Example: Kingston HyperX DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3. For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.

Slots & BIOS: SLOTS • One AGP slot supports 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V (3.3v is not supported) • Five PCI 2.2 32-bit Master PCI Bus slots. (support 3.3v / 5v PCI bus interface) BIOS • The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically. • The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.

Serial ATA iInterface: • Promise 20378 controllers 2 Serial ATA ports in 150 MB/s operation mode and 1 ultra DMA port • Support Ultra ATA, Serial ATA, Raid 0 or 1, Serial ATA Raid 0 or 1, Ultra/ Serial ATA Raid 0+1 • Connect upto 2 Serial ATA devices and 2 Ultra ATA 133 devices

Audio & LAN: Audio • 6 Channel software audio codec ADI S/W 5.1 channel audio 1980 - Compliance with AC97 v2.2 Spec - Meet PC2001 audio performance requirement - Support SPDIF out via S-Bracket only Lan • Intel® 82547EI (CSA interface) - Integrated Fast Ethernet MAC and PHY in one chip - Supports 10Mb/s, 100Mb/s and 1000Mb/s - Compliance with PCI 2.2 - Supports ACPI Power Management

On-Board Peripherals: - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes - 2 serial ports (COM A + COM B) - 1 parallel port supports SPP/EPP/ECP mode - 8 USB 2.0 ports (Rear x 6 / **Front x 2) (**Front USB ports are supported by pin-out) - 1 Line-In/Line-Out/Mic-In port - 2 PS/2 connectors - 1 LAN RJ45 connector - 3 IEEE1394 port controlled by VT6306, with up to 400Mbps transfer rate.

Payment:

WE ACCEPT PAYPAL, PERSONAL CHECKS, & MONEY ORDERS!!

No CREDIT CARDS EVEN IF USING PAYPAL!!!!!!

---If YOU USE BUY-IT NOW SHIPPING IS FREE!!!!!---

Shipment:

I SHIP WITHIN 24 HOURS of PAYMENT RECEIVED
SHIPPING LOW LOW $14!!! INSURANCE: add $6!!!
Foreign bidders please contact for shipping prices.

Other things you the buyer should know:

QUESTIONS ARE ENCOURAGED
We stand behind our products and we offer refunds for any products that are faulty.
GUARANTEED NO DOA!!
If for any reason you are not satisfy with your product. Just send it back and you will get a full refund minus shipping

Paypal Verified so bid with CONFIDENCE. Thank You for your business.