|
Beyblade design In this page you will learn how to make your own unique beyblade with a few easy steps! Just follow the steps and remember to make it as unique as possible, but it has to be able to work. You can either use a new beyblade or broken parts. I have made some of my own beyblades which are extremely good, I will give you an example by showing you how to make that. I will also give the beyblade a mark out of 10 depending on how good it is. Steps to make "Sazer" 1. You need full Master Draciel, circular weight disc (preferably green), vice grip, pliers, file, hot glue gun, green and dark green model paint. 2. Take the attack ring and hold it with the vice grip. Then take the pliers and clip off the 3 wings sticking out of the attack ring, making sure not to break the wings. 3. Take 2 out of the 3 wings and shave the part where it was broken off with a file so it curves on to the top side of the base. 4. With hot glue from a hot glue gun, glue the 2 wings on to the base at the top of it, make sure the 2 wings are exactly across from each other so it will balance. 5. Take of the Purple with yellow stickers on the triangular plastic on the attack ring and paint the green dark green. Then beside the 3 wings that were broken off paint the 6 rectangles the lighter shade green. 6. Paint the base (not the part that goes down into the curves, and not the tip and the cylinder above that) Paint it all the lighter shade green with blotches of dark green to like army color. 7. Attach the attack ring with no wings, base with 2 wings and circular weight disc together. Now you have your camouflage army "Sazer" Blade that is amazing in battle and trips the opponent. 4/10 Steps to make "Platinum Galeon" 1. You need a full galeon, Hayate or other hidden spirit beyblade weight disc (Circular with nudges), silver paint, hot glue gun. 2. Take off the all the stickers on galeons attack ring except for the bit beast and paint the places where the stickers were silver. 3. Paint the base all silver except for the part at the top that goes up and the tip and the cylinder above it. 4. With hot glue from the hot glue gun put glue all around the base's edge except for the clips. Then slide the hidden spirit weight disc right on. It will fit perfectly. 5. If you want attach a zoids command wolf black rubber cap on the tip to make galeon the fastest blade you've seen, there is a downside because it is practically impossible to control. 6. Attach all the pieces together, the base with the disc, the normal sized 8 balance weight disc, and the attack rings together. Now you have your lightning speed "Platinum Galeon" with heavy attack power and 2 weight discs. It is even capable of beating a sun fire weight disc blade. 10/10 Steps to Make Your own Unique Beyblade 1. You can use a whole beyblade or parts, even broken parts. 2. Add things like add ons, tape, diff parts from other beyblades, household things to your blade making it unique. 3. Paint your beyblade how you like it. (Note: Remember to use strong glue because the parts may fly of in battle) There you have it your own unique beyblade, it may sound easy but sometimes its not. More beyblade steps to make a beyblade coming soon...
Vote us:
|
 |
||
|
|
||
 |
||
 |
||
|
||
