Site hosted by Angelfire.com: Build your free website today!

The Edwin Gray Pulsed Capacitor Discharge Electric Engine

Many have thought that the machine had been destroyed by Federal Authorities in bid to stop Edwin Gray in bringing to this world this device, but parts of the machine have now been discovered on an electronics store junkpile these are the photographs of an researcher who is try to get the Gray machine put together and working again.


if you wish to discover more information on this device please check these following links on this cd.

The Free Energy circuit for the serious researcher
Edwin Gray's Energy System by Bruce A. Perreault
Re discovery of the E.V. Gray Electric motor
The Edwin Gray Pulsed Capacitor Discharge Electric Engine
A possible answer to how the Testatika and Edwin Grays machines work
A possible answer to how the Testatika and Edwin Grays machines work
Some additional information on the construction Edwin Gray's conversion tubes
How Edwin V Grays Conversion tube worked US patent filed 1986


Alf Ac Dc Motor Generator


Alf Ac Dc Dynamo


Alf Dynamo


Alf Motor Generator 1


Francoeur Ac Dc Dynamo


Gray Core and Coil


Gray Core and Winding


Gray Dismantled Core


Gray Motor 4 and 5


Motor 5 coils


Radiant Energy Generator and parts


Restored Motor Cores


Some details on construction of the Gray Devive from present owner


Ed Gray's radiant energy motor #4 has two impulse coils, one mounted on the rotor and the other mounted inside of the stator housing. The stainless steel shaft is 30 inches long and almost 4" diameter with large bearings that are priced over $100.00 dollars each. It is obviously built to handle a lot of hp power.

The ROTOR coil mounted in motor #4 has 168 feet of magnet wire gauge #14 wound in it, and the core size is included in the file I uploaded to the archives named, Ed Gray Impulse cores motor #4.

This rotor core has a total of 154 layers of plates that make up the core stack. It also has 3 core sections that are 3/4 " thick each, one mounted on each end, and the third is mounted in the middle with 77 core leafs on each side of it. The core is a lotal of 6" long.

Ed Gray rotor coil has a total of 112 turns of magnet wire wound on it, with 13 layers on the first row, 14 on the second row, 14 on the third row, 15 on the forth row, 14 on the fifth row, 14 on the sixth row, 14 on the seventh row, and 14 on the eighth row.

Ed Gray's rotor 3/4" core sections have holes drilled in them with nylon inserts for insulation purposes from the mounting bolts holding the coil to the rotor shaft. The rotor shaft has a counter weight that equals the mass of the working rotor coil, this is to balance the rotor for high rpms.

The STATOR coil has a total of 115 turns of magnet wire wound on it, and this core size is also included in the file I uploaded to the archives named, Ed Gray Impulse cores motor #4. There are 13 layers of #14 gauge magnet wire on the first row, 15 on the second row, 13 on the third row, 15 on the forth row, 14 on the fifth row, 15 on the sixth row, 15 on the seventh row, and 15 on the eighth row. The stator coil has a a total of 175 feet of magnet wire wound on it.

There are three solid core sections that are 3/4" thick each. The one in the middle of the core has 92 layers of core leafs on each side of it, with a 3/4" solid section mounted on both ends of the cores. Gray stator core 3/4 inch sections have holes drilled and taped for bolt mounting to the inner tube of both of these Gray motors.

The cores in Gray's coils look to be composed of regular magnetic steel laminates, they can be stamped out of plate material.

There is no amorphous material in Gary's cores, there for, it is obvious to me that Metglass amorphous materials are not needed to achive this radiant energy effect..

Ed Grays motor #5 is constructed from very strong nylon and fiber glass grade phanolic materials that are green in color. The shaft is also 30" long and it is constructed of this green phanolic material, this is a very exspensive motor to reproduce. Gray's constructed his motors with100% high quality precision machine work, and spared no expence in his efforts.

I hope this information helps all you folks out there that are working on radiant energy circuits.

All the best, and have a great day every day.

Alan L Francoeur or ALF
Aetheric Radiant Energy Research
Magnetic Energy Systems
Penticton, B.C. Canada,,


Inventions from Alan L Francoeur the now owner of the Edwin Gray Device.

The Interference Disc electric generator by Alan L Francoeur

General description and drawing diagrams of the Interference Disc electric generator

Photographs of the Interference Disc electric generator

Goto.com: Search made Simple

Subscribe to energy2000
Powered by groups.yahoo.com